All posts tagged Spikes tactical uppers

Are you having a hard time finding the AR15 upper that you want?

After seeing about a 4yr increase in sales of firearms, we’ve pretty much come to the conclusion that certain .380 pistol magazines, gun holsters and firearm accessories are going to be hard to get for a few more months.   Much of what is going on is an increase in firearm sales due to the social and political problems we are facing.  We have elected individuals to higher office that do not have traditional patriotic values and seeing them gain power is disturbing to anyone that understands the Constitution. Runs on emergency food storage and ammunition were the next things to go prices have increased with the demand.  We’ve seen more sales of higher end firearms and accessories because the cheap stuff was all gone.

We have backorders for AR15 uppers going back to November for Spikes Tactical, Daniel Defense, Smith & Wesson and many more.  The real issue is that many of the manfacturers are selling more complete guns and making AR15 upper receivers for sale is not something as important as selling a complete gun.  Many gun shops would rather sell guns than uppers.  If you having a hard time getting the uppers make sure you put your email in the “email me when back in stock” option on our website.  We do get in many uppers but the quantities are small and come in sporadically.   It’s a hard time for people building AR15s because there are some waiting periods if you know what you want.

 

Top

The answer to what you want is to go to a store and hold it in your hands

I use to organize lots of gun club events and the best thing about it was being able to try out things that my friends would show up with.  We would even put out requests before hand and ask people to bring a certain firearm out if someone owned it.   It was very cool to have some of my requests fulfilled when I got to shoot a 5.45×39 AK next to a 7.62×39 one.   I did some long range testing with it and anyone with an honest mind will tell you that it makes sense that the Russians switched over to the 5.45×39 caliber.  Shopping for gun accessories online can be a pain and sometimes it’s always best to go back to the manufacturer and ask them.

We’ve had to sell off some of our high end upper receivers whenever we found out that a new version of this was coming out.  Sometimes a slight spring or finish occurs on the AR15 complete upper receivers and its all of a sudden an old version.   Just look at what Glock did with all of the Generations of Glock firearms and the infamous recalls.  I am never one to be the first to buy a firearm because ever since the XD45 came out, I saw guys send them back to the factory for improvements.   That never happened to me with my Sig Sauer pistols so it’s sometimes best to know you are venturing into unknown territory if you try something new.   Ask questions and try things out or put on your Lewis and Clark.

Top

Have enough guns? How about more upper receivers for your AR15?

I don’t think you even need to worry changing calibers if you want something different than a 556 upper.   I’ve seen guys turn an M4 Carbine into a varmint rifle with a snap of two pins on a lower receiver.  The real thing to look out for is changes in calibers, namely to a 5.45×39 upper.   Many times I’ve seen guys skip the hammer spring change and end up with a light strike issue with Russian ammunition. We sold a ton of the Smith & Wesson 5.45×39 uppers a few years ago but for some reason they just don’t seem to be available.

 

The LWRC M6Ak was a one off novelty deal which died a quick death and no word if it’ll ever happen again.
Right  now the biggest selling upper receiver we have are the Adams 5.45×9 uppers.  I had a customer take apart his gun side by side to my AR15 complete upper receivers and compare the piston differences.  There is a difference and I still love my LWRC M6A2 but this gun was a next best thing and a best thing for a 5.45×39 upper.  You still can’t beat the cost of ammunition for these guns and the  caliber does have a better reputation than the 30 caliber AK.   I’ve known guys that took hits from the AK it has so much energy that it just zips through you and the Russians finally caught on that the 5.56 was a better combat caliber.

Top

AR15 upper receivers sold out

I guess the less expensive stuff is what most people seem to go for and right now that is everything from Spikes Tactical.  The funny thing is these guns are so well made for the price that they were in high demand even before things heated up in the Country.  The AR15 is the primary firearm in the United States and transitioning from Civilian to Military with it is an easy step.  Many people forget that the original intent of having an armed population is so that the population could be called to arms at any moment to defend their Country.

Now that so many people own the AR15 changing the guns to something longer or shorter or to MOE can be as easy as pushing 2 pins out.  There are definitely some big differences in the durability of the firearms, but the lower end of the spectrum for AR15 upper receivers is pretty darn good.   Mismatched parts and bad assemble isn’t something I heard about too often anymore.   The poorly run companies seem to have been cleaned out and there are some really good guns being made.  We’ve sold lots of gas piston AR15s this year and the pool is getting competive.

Top

What do you want in an AR15?

So many people have that itch to constantly modify their firearms, and there is nothing wrong with that, but the one thing that I have constantly seen happen on firing ranges, especially Carbine courses, is people simplifying their firearms and accessories.   The different between a 7lb Carbine and a 10lb Carbine is considerable and you really feel it at the end of the day.  Even the best shot will have trouble keeping up the consistency under stress and physical stress will always occur at some point in the field.  If  you think about it like this, if you had to use a firearm in your home and hold it in a ready position, a double stack 45acp is going to be hard to kept upright on a threat for very long. People with experience in  using firearms always trend towards simplicity.

The trend towards simplicity actually occurred almost 50yrs ago when the Army adopted the M16 and replace the M14.   That was the first major transition towards simplicity and a lighter firearm.   The AR15 complete upper receivers that we sell have very diverse applications.   Some are for designated marksmen applications with longer and usually heavier barrels and then some are for Patrol vehicles and are as short and light as possible.  Right now the Daniel Defense uppers that we sell win the lightest AR15 contest but it’s been too early for us to claim they are as tough as some of the others.

Top

LWRC M6A3 now a thing of the past

We just got word that the LWRC M6A3 is on the chopping block but right behind it is the new LWRC M6A5.  From the early info we have gathered so far, the M6A5 has a 2 position gas regulator and that is the only difference.  Not sure about any other changes but I think this was just a simplicity issue.   There is nothing wrong with simplifying a design because some gun parts and accessories can wear out or be hard to place or are just a wast of manufacturing time and energy because it is not necessary.   We have seen LWRC stop the M6 rifle because it was just so old and the demand for something more on a carbine was there.

I still have my original LWRC M6A1 carbine and I love it although it isn’t the same guy it was when I first purchased it.   The thing about the AR15 upper receivers that I have held and shot, is that there are so many configurations and variations out there that sometimes the guns are just flat out not the same.   The AR18 is also know where near the same as an LWRC gun nor is it like the Sig 556.   There are differences between rifle grips and some are mil spec and some are commercial

Top

Do you want a plinking gun or a combat durable firearm?

I am still a big fan of SWAT magazine even though print magazines seem to get written off as gun rags, but I find this to be utter bull shit.   Not all gun magazines the are the same and I for one mostly follow about a dozen gun writers because I want to hear their opinions on some of the products out there.  Yes, the gun industry is full of materialism and novelties, but there is a real world out there and I want to hear from real world individuals about hardware that can cut it.   Much of the firearm industry is about preference, whether it’s tactical pants or firearms.

There is cheap crap out there, although I’d say it’s not so bad anymore because gun acceessories like Magpul have pretty much buried the competition.   Everyone and their dog is putting out a gun or AR15 upper receivers with the Magpul acessories on them.   They are not that expensive and they hold up.  Proper mounting is always a big deal with gun accessories but I’ve already cracked quite a few gun parts and none of them were Magpul accessories.

Top

Too much to think about or lots to think about ?

After watching many Youtube videos about what is coming out in 2012 I was mostly bored out of my skull trying to understand why I would bother spending another $2000 for an AR15 that is slightly different than what I already own.   Sure there are improvements but spending $2000 on something that is 5% more of a gun than an AR15 that you already own doesn’t justify the cost.   I am a big proponent to upgrading what you have.   There was a really good article in Swat magazine years ago about improving what you already own and the small things you can do to improve your AR15.   Replace extractor springs, stake screws, lube your gun right and you’ve just improved your gun for less than $150.

If you are looking to make your Carbine a firearm that you can rely on, make sure you don’t over think the configuration and setup.   I understand why people spend $2000 on AR15 upper receivers that have folding front and rear sights, but if you have folding front sights keep in mind that you have one more step to getting your firearm up and running and that is something to seriously think about.   I am a firm believer that people need to adapt to weapons and gear and not always expect to adapt the firearm to them.  Fixed front sights have been around for a long time and I don’t think changing that another thing that needs to be folded or screwed on is worth the liability.

Top

Uppers and Lowers and endless modifications, what’s the answer?

The simple answer is get more guns.   The real problem I see with many people that tinker too much with firearms is that they can really mess stuff up.  I remember seeing this with guys that overly modified their 1911s and put springs in the guns that they should not have and they ended up with an accurate POS.   I don’t know how many times i’ve say behind a guy on the firing line that continuously informed me that his firearm was reliable but I’d watch them clear malfunctions all day and they would just blame the ammunition.

In my opinion, that is like watching a guy put tires on a car that are  not the same size and saying the only reason he crashed the car was because when he made the wide turn the tires that were not uniform made him loose control.   Well, stop messing around so much with your AR15 lower receivers and your AR15 upper receivers and make sure that once you get something that is reliable, stop screwing around with triggers and springs.   You are better off with multiple firearms that do different things than trying to push a firearm to do everything.  There is a trade off between reliability and accuracy and rarely does a firearm do both for very long.

Top

Going form one AR15 to another configuration

The thing that I love about the AR15 is that there are so many choices out there and the guns are just getting better and better.  I personally prefer LWRC guns because they are easy to maintain and the machining and quality is so good.  Many of the gas piston driven AR15’s out there are kind of pricey but in the long run they should cut your gun cleaning time by 75%.   Although that whole argument about gun reliability doesn’t real  hold any water anymore because AR15 reliability has more to do with the type of gun magazines you use than how much cleaning you do.

Several firearms instructors I have spoken to have told me that they’ve seen more firearms damaged by over cleaning than guns ruined by not being cleaned.   It’s seems that many AR15 upper receivers for sale at Rogue Elite can be found on Youtube with some type of malfunction drill where dirt and water tests were done and the guns passed.   All firearm machining has improved in the last decade and the differences between the manufacturers has more to do with the mission or preferences than about durability and reliability.

Top
1 2 Page 1 of 2