Rogue Elite

I was fortunate to attend a sniper competition a few years ago where I must have learned more about combat than every before.   About 40 students were attending this training competition even and given the rules for attending the match.   Everyone was told to arrive with unloaded firearms, but to keep all of their gear in the cars and attend a safety briefing.    Well, one of the  best events for this competition/training even occurred in the first 30 seconds after the safety briefing.   Everyone was asked if they understood all of the safety rules and when everyone said yes, it began.    The Instructor explained the first stage of the shooting event.   Everyone was told to grab their gear from their car and immediately return to the firing line, unload the gear and engage the targets.   The attendees gave us a big smile while the students/competitors did an “Oh, Shit!”

I sat and watched every student run back to their car which was about 15-30yds behind the firing line, I noticed varying types of rifle cases and rifle bags, some shooters showed up with loaded magazines and others had to manually load the guns, as soon as they were ready to shoot, they engaged the targets.   I believe they had 6 minutes to take down all of the targets from 100-200yds.   The variations in time to engage the enemy targets varied by several minutes.   Anyone that had a M4 Carbine or 30rd magazine that didn’t have loaded gun magazines or didn’t have a speed loader, was the last to engage the targets.   I saw only 2 people out of 40 engage the targets in the first 5 minutes.   Maglula speed loaders are must for anyone serious about using a carbine for self defense, unless  you have the military style loaders.

There are various stages of CCW experience, those that have made the mistakes, those that have witnessed the mistakes and those that are doomed to see both.  Although a gun owner may be observing all of the firearm safetey rules there are still many things to keep in consideration when CCW a firearm.   Even though a gun hasn’t been fired, if it is being carried it will fill up lint or the gun can become dry.  I have carried guns through out the summer months and found out that I’ve rusted out screws or pitted firearms.  Clean your CCW guns for reliability sake, but also for protection.

It is extremely important for you to rotate your carry ammo.  Many reloaders know the importance of having the proper bullet crimp to prevent bullet setback, but this is something that is inevitable going to occur if you keep closing the slide on the same bullet.  Even if you are not shooting up your ammo, rotate the ammo in your gun magazines to make sure you are not slamming the same first round.  Defensive ammo can be expensive and I realize that you aren’t going to want to shoot it all up after a couple times of cleaning  your ammo.  If you rotate just an 8rd magazine full of defensive ammo, you should be able to dissassemble and clean the gun safetly about 24 times with the same magazine.

Today I got to fire a Ruger LCP along with the LCR revolver.  There seems to be a lot of breha when it comes to getting a .380 pistol these days.  I don’t think I really ever felt the urge to go that small when it comes to calibers, but since CCW is actually more popular now than it was 10yrs ago, and people are finding that small compact semi-autos are far more reliable than previously, people will take the light weight over a larger caliber.   The Ruger LCP can take laser grips from Crimson trace, and I highly suggest that you consider that.  I was never a big fan of putting lasers on handguns until I started thinking about very small and compact firearms that had terrible small sights.   The laser grips will help improve your hits and give confidence.

I have several Ruger factory gun magazines for my LCP, but I decided to pick up a few Promag magazines.   Promag had a good reputation in the 1990s for magazines that weren’t as pricey as factory magazines, but were still considered reliable.   I have several magazines for my Beretta 92FS, and although I did have a jam on one hollow point round, it has never jammed on ball ammo.   I would consider these to be excellent range magazines, but I would do a lot of testing to make sure you are sure the gun feeds reliable with an defensive ammo.   Some magazines may need to be tweaked a little and if you have problems be sure to call a factory rep.   Most gun magazine manufacturers will replace a magazine if it does not work properly.

The one thing I have learned over the years is that no matter how much money I spent on a firearm, I’m still going to have something break.  When you put thousands of rounds through a firearm the you will eventually have to learn some level of gunsmithing.   After taking some of my guns to gunsmiths and having to wait for months to get simple things done, it’s good to pick up an AGI video and do the changes yourself.   The same goes for gun magazines.   Parts on a gun magazine can wear out and depending on how much you spent on the magazine, you may want to just toss it in the trash.  For some magazines, you will only have to replace the springs to get it back to reliable functionality.

Gun magazines have various levels of quality.   Some gun magazines are meant as throw aways i.e. 1911 magazines made in Tawain.   I have several 1911 GI magazines that were pretty good range mags, but when they jammed up on me, and I could blame it on the gun springs, it was time to toss them.   Buying Wolff gun springs that cost about $8 for an $8 magazine isn’t really worth my time, plus I’ve found that many of these have worn out followers and it’s really not worth the headach to tweak them, plus I’d consider them to not be worth using for self defense.   Wilson Combat and Chip McCormick make very good gun magazines and both of them should help get your 1911 to be more tolerant of various types of ammunition.

There seems to be a new craze in competition shooting in recent years.   I’ve seen more high school boys coming home from class with Zombie survival guides, the recent 28 Days later type movies and the doomsday virus outbreaks.    I guess IDPA has lost some traction to the present generation, but I’ve attended a few Zombie survival competitions and they were very good training events.   The best thing about it was the amount of tactical gear that I watched fail, and the number of really novice mistakes people made.   Out of the 5 stages I attended, there was 1 stage that we saw about 18 firearms go down.   About half of those were AK variants and they were mostly magazine related.  Some guys never knew how hard it was to do a tactical reload on an AK if there was a round in the chamber and a fully loaded 30rd magazine.  People found out what happens after firing off the 1st round and the magazine falls out.

Do search for gun clubs and shooting ranges in your State to find out if anyone is holding a Zombie shoot.   They usually occur in the September to October months.   Having some good tactical clothing that will securely hold your gear.   The Eotac Style 201 pants are my favorite because they hold 6- 30rd PMAGS and they are easy to run in.   Tactical vests like the Style 101 are not heavy and don’t make you feel like you are wearing a flak jacket.   There is a time and a place for different types of tactical vests, but mobility is important.  You may want to try getting your magazines loaded up with all of your gear and then try running 100yds with it and see what it feels like and if stuff starts to fly out of your pockets.   Mobility is extremely important.

The Boy Scout motto is BE PREPARED.   When we accept our responsibilities in carrying a firearm, one thing we have to be aware of is making sure that we are concealing our weapons and not overdoing it.    There are a few placed in the Country where you may be fined if anyone spots your concealed firearm, and although I think the vast majority of criminals aren’t looking for citizens with guns, it’s best to not advertise it.   I’ve found that over the years of carrying duty size weapons on the job and CCW are different for me.   I’m not too comfortable carrying double stack spare magazines around all day.

Something to consider while carrying a CCW gun is, it is good to always have a backup magazine available, but don’t go overboard in carrying gun magazines.   Statistics show that most gun fights occur with shots fired being in the single digits.   Knowing how to retreat from a gun fight is more important than carrying tons of ammo and expecting to stand your ground.

I’m not so sure there is as much of an issue in the gun industry as there once was concerning factory mags vs. aftermarket.   Most gun manufacturers can legally get their products to the civillian market without major legal issues.   Back in the 1990′s trying to get “Standard Capacity” magazines meant paying 4-5 times what they should have cost.   I remember avoiding certain firearms just because I knew that the magazines would cost $50-$100 and that just didn’t seem like a good investment at the time.   I noticed sales of the Beretta 92FS were very common back then because they were one of the few firearms that has resonable priced pistol magazines.   Finding good deals on used Glock magazines was a whole other issue, but if you weren’t buying guns back then, you probable have a hard time understanding how complicated the situation was.

The Mini 14 was hands down the gun that was  hit the hardest by the AWB in the 1990′s.   Ruger is now making 20rd and 30rd magazines available to the public and those magazines were going for close to $100 at one point in the later 1990s’.    There is nothing wrong with having magazines for firearms that are not the best, sometimes it’s better to rotate through cheap magazines and practice malfunction drills or just toss them when they were out.   You don’t want to use  your carry mags all the time because if you are shooting through hundreds of rounds of ammo using the same mags that you use for your daily carry, you may find out at the wrong time that the springs need to be replaced.   I picked up a good supply of Mil-Spec 1911 7rd magazines that I rotate through my guns and save the Wilsons Combat Magazines for the serious shooting.   When the mil-spec mags start jamming too much, I just toss them.

Every time I get asked a question about which firearm or accessory someone needs I follow up with the question “For what?”   I have seen plenty of well trained concealed carry owners walk around with a 5 shot j-frame and none of them feel under gunned.   The reality is that in some nightmare situation, you’ll never be full prepared, and sometimes we just have to be practical when we are CCW every day.   For most practical purposes, I’d recommend keeping a spare magazine in your gun safe in your home, or keep one in your car if you don’t think you can comfortable carry a backup.   When most of us are out and about, the ammunition you have on you is all you’re going to be able to fight with, but keeping something near your car and easily accessible in your home is a good idea.

If you are cop or military, you probable don’t need my advice to know how much ammunition to carry.   I’ve noticed that most of the Police in my area have 2-3 pistol magazines on them, but considering that they are usually full size glocks, I think 45-60rds of pistol ammo should easily get you back to your shotgun, M4 Carbine, or back to your radio to call in the SWAT Team.   Police these days are more likely to walk into nightmare scenarios and carrying that much ammunition is called insurance.

Although I understand that polymer guns are here to stay and they are far more technologically advanced than their early metal counterparts, I still enjoy shooting my 1911 handguns.   The 1911s that are being made today are really several generations beyond where the guns that crossed the European continent and fought on the beaches of the Pacific.   The best improvements I have seen in the 1911 design compared to the GI guns are #1 the pistol sights, and #2 the gun magazines.  The GI 1911 magazines weakness seemed to be the followers.   The slide stops were so heavy that many of the times the tabs on the magazine would bend and the slide would close on an empty chamber.

Wilson combat and Chip McCormack magazines have the best reputations for durability.   I’d have to say that I’ve had good experiences with both magazines and really can’t say one is better than the other.   When it comes to many of the other pistol magazines,  I always go with factory magazines.   Now that the 1994 assault weapons ban has expired and many manufacturers were able to get their standard capacity magazines back on the market.   Without any real threat coming from Congress on gun control, prices have come down and it’s really a good idea to stick with the magazines that your manufacturer makes for your gun.

I think more than half the guns I have picked up for my collection were police trade ins.    CDNN investments is always one of the best places to find used handguns.   If you are a Glock, Sig or Beretta gun lover.  Check out their yearly catalog for used but hardly shot guns.    I picked up a Glock 17 a few month ago and like many of the guns that are trade ins, this gun had mostly holster wear on the outside.    One of my friends got one that was much more worn especially around the barrel.   While something like barrel wear has to be analyzed closely, it rarely is much of a concern to me.   Many of the used firearms you find in gun shops probable have less than 500rds  through them and the reason they look beat up is because of the holsters that they were used with and the fact the owner didn’t clean them very well.

I have a few rifles that were not maintained as well as others and you can see the difference in firearm wear after a few thousand rounds.   My friends Glock 17 did show signs of not being as accurate as mine so I did suggest he look into getting a new barrel.    For another $150 or so, you will get your accuracy back and from my experience, most glock barrels can just be dropped in.    Even though there is much to back that Glocks do not need as much lubrication, it’s still a good idea to maintain your firearms, mostly to reduce the amount of wear and tear.    I’ve seen huge variations in Beretta 92FS barrel wear just because I could tell the operator was not lubing their pistol correctly.   I’m also a big fan of using small amounts of grease in specific areas of handguns just because it grease doesn’t dry up or slide off as easily.