Rogue Elite

It sure use to mean that, but pocket guns have come a long way.   Defensive ammo has gone a long way in recent years and the 38 special ammo your grandfather used in Law Enforcement is not the 38 Special you have today.    I did some chrono tests with a Smith & Wesson Model 19 and the  feet per second velocity between that and j-frame Model 637 was dramatic.   I was breaking 1000ft per second with the j-frame and it really literally blew me away.   I always thought that having a 4 inch barrel on a gun meant that it was shooting a load faster, but not the case with these two guns.

A friend of mine told me that everything he thought he knew about ballistics was thrown out the door when he got his first Chronograph and I agree.   I also though that because a gun fit in my pocket that it had to be weaker.  I am still trying to unlearn what I had learned with pocket guns, but another buddy of mine did some ballistic tests where he proved that his 32acp penetrated ballistic gelatin as well as a 38 special.   While there is definitely some variations in results from firearms, the ammo you put in your Kahr PM9 and the 6rd or 7rd Kahr magazines that you are using, may be far more potent than you realize.   The Kahr firearms are probable one of the most durable small guns out there and they have had several improvements over the years that put them above their competitors.

I’m old enough to remember how much of a nightmare it was to find “standard’ capacity magazines for handguns in the late 1900s when the impact of the AWB was in full affect.   I use to buy semi-auto handguns based on how much the magazines cost and ended up sticking with 1911 handguns and Berettta 92FS firearms.   The Beretta 92FS is still a favorite 9mm of mine, but I have other guns that I prefer for myself.   While I was using my Beretta as a standard CCW gun, I only had 3 standard capacity magazines for it and one of my friends who was moving and getting married was selling his, I only ended up buying his gun magazines off of him.

I have had several Promag magazines from AR15 to 1911s and Beretta 92.   I would say that they are all manufactured from different times and quality varies, but the reliability has been fairly good.  I would not consider them for primary carry, but they are good range magazines.  I have a few friends that use them as primaries, but I would do thorough testing with them and consider having to use a pair of pliers if you have any issues.  I have had very good results from the Promag gun magazines that are made for the Mini 14 and Mini 30.   The 5rd magazines that Ruger ships their guns with are flush fitting and in many States the 20rd and 30rd are illegal, but the 10rd magazines make the Mini 14 a better defensive weapon in these States.  There aren’t very many other options for anything other than 5rd Ruger magazines.

There has been much debate about the 45acp use in handguns.   With the number of shootings I have seen where 9mm bullets were used, I’d have to say that the 9mm is definitely not a powerful round, but I have heard of bad guys taking multiple hits from an M4 that kept on coming, so there are many things that can come into play.   The 1911 has remained a popular gun and not because it is the most reliable weapon in 45acp.   I have come to the conclusion that the modern polymer guns are superior to metal guns as far as durability and reliability, but many of them do have crappy triggers.

When the Springfield XD first came out, it was a big deal for 1911 guys to find something that wasn’t a DA/SA handgun and didn’t have a sponge trigger like Glocks do.  You can get a lot of improvement in reliability with a 1911 with good gun magazines like Wilson Combat or Chip McCormick.  I have respect for Glocks, but they do have an odd feel to them and are not traditional.  The XD 45acp felt more natural to a 1911 enthusiast and brought them into the modern world.   The 1911 still has one of the best triggers, but it is not in the same category as some of the guns being made in 45acp these days.   I have several Sig 220 that have been extremely reliable, but Glock has an edge over them as far as endurace.

I think this past year may have been the year of the .380 pistol.   I don’t know exactly why everyone went with the .380 this year, but it was popular and considering the run on the ammunition and it’s lack of availability,  I think I should have purchased some stock in .380 and not just gold.   I recently attended a Taurus firearm event where the TCP .380 was being shown.   When I think of .380 guns I believe that up until this year, I could only think of the Sig Sauer 230 and the Sig 232 and the Walther PPK.  I have enough friends that like the look of the PPK but were not a fan of the gun due to the hammer bite.   If you have big hands that gun is most likely not for you.

The TCP was a little finicky about the ammo it ate, but I have shot several of the Rohrbaugh R9 pistols and they were also very picky about the ammo they ate.   When  you get down to those small semi-auto guns, you better put the range time in to know the limitations of the guns.   You won’t get a pocket pistol that will run for hundreds of rounds without needing to change springs or be lubricated.   Rotating your gun magazines is a must for smaller semi-autos. The .380 is also a very mild round and I witnessed first hand the lack of energy it had when shooting steel plates.  I watched a recent video where I heard 4 shots fired, one miss, 3 hits and the metal plate only fell one time.  Be realistic about the guns you are carrying and and why.

I was fortunate to attend a sniper competition a few years ago where I must have learned more about combat than every before.   About 40 students were attending this training competition even and given the rules for attending the match.   Everyone was told to arrive with unloaded firearms, but to keep all of their gear in the cars and attend a safety briefing.    Well, one of the  best events for this competition/training even occurred in the first 30 seconds after the safety briefing.   Everyone was asked if they understood all of the safety rules and when everyone said yes, it began.    The Instructor explained the first stage of the shooting event.   Everyone was told to grab their gear from their car and immediately return to the firing line, unload the gear and engage the targets.   The attendees gave us a big smile while the students/competitors did an “Oh, Shit!”

I sat and watched every student run back to their car which was about 15-30yds behind the firing line, I noticed varying types of rifle cases and rifle bags, some shooters showed up with loaded magazines and others had to manually load the guns, as soon as they were ready to shoot, they engaged the targets.   I believe they had 6 minutes to take down all of the targets from 100-200yds.   The variations in time to engage the enemy targets varied by several minutes.   Anyone that had a M4 Carbine or 30rd magazine that didn’t have loaded gun magazines or didn’t have a speed loader, was the last to engage the targets.   I saw only 2 people out of 40 engage the targets in the first 5 minutes.   Maglula speed loaders are must for anyone serious about using a carbine for self defense, unless  you have the military style loaders.

There are various stages of CCW experience, those that have made the mistakes, those that have witnessed the mistakes and those that are doomed to see both.  Although a gun owner may be observing all of the firearm safetey rules there are still many things to keep in consideration when CCW a firearm.   Even though a gun hasn’t been fired, if it is being carried it will fill up lint or the gun can become dry.  I have carried guns through out the summer months and found out that I’ve rusted out screws or pitted firearms.  Clean your CCW guns for reliability sake, but also for protection.

It is extremely important for you to rotate your carry ammo.  Many reloaders know the importance of having the proper bullet crimp to prevent bullet setback, but this is something that is inevitable going to occur if you keep closing the slide on the same bullet.  Even if you are not shooting up your ammo, rotate the ammo in your gun magazines to make sure you are not slamming the same first round.  Defensive ammo can be expensive and I realize that you aren’t going to want to shoot it all up after a couple times of cleaning  your ammo.  If you rotate just an 8rd magazine full of defensive ammo, you should be able to dissassemble and clean the gun safetly about 24 times with the same magazine.

Here’s the really short answer to that, that are good and they are better than they were a decade ago.  For those that went through the horror of having to deal with the 1990s and the BS from the assault weapons ban, many of us had to scrounge around looking for pistol magazines that cost 1/4 of what factory gun magazines cost.   I would normally say that you should really stick with the factory magazines that you have for your firearm, but MecGar and Promag do make decent magazines and they are considered in he B+ category.   I would say that the cost of these mags vs factory magazines insn’t significant, but you can get them for a reasonable price.

My Beretta 92FS is probable the most tested out gun I own that has used non-factory magazines.  I even have some no name magazines that hold 18rds each, but I to this date have no idea who made them and they have been extremely reliable.   I had a pistol course a few years ago in New Jersey where I had to leave all of my 15rd + magazines at home and only bring 10rd magazines with me, Promag Magazines ran the course and although I was shooting ball ammo, I had zero malfunctions out of over 300rds fired.   I never got around to testing them out with defensive ammo, but I highly suggest you test magazines with the ammo before you get into your comfort zone.

Today I got to fire a Ruger LCP along with the LCR revolver.  There seems to be a lot of breha when it comes to getting a .380 pistol these days.  I don’t think I really ever felt the urge to go that small when it comes to calibers, but since CCW is actually more popular now than it was 10yrs ago, and people are finding that small compact semi-autos are far more reliable than previously, people will take the light weight over a larger caliber.   The Ruger LCP can take laser grips from Crimson trace, and I highly suggest that you consider that.  I was never a big fan of putting lasers on handguns until I started thinking about very small and compact firearms that had terrible small sights.   The laser grips will help improve your hits and give confidence.

I have several Ruger factory gun magazines for my LCP, but I decided to pick up a few Promag magazines.   Promag had a good reputation in the 1990s for magazines that weren’t as pricey as factory magazines, but were still considered reliable.   I have several magazines for my Beretta 92FS, and although I did have a jam on one hollow point round, it has never jammed on ball ammo.   I would consider these to be excellent range magazines, but I would do a lot of testing to make sure you are sure the gun feeds reliable with an defensive ammo.   Some magazines may need to be tweaked a little and if you have problems be sure to call a factory rep.   Most gun magazine manufacturers will replace a magazine if it does not work properly.

The one thing I have learned over the years is that no matter how much money I spent on a firearm, I’m still going to have something break.  When you put thousands of rounds through a firearm the you will eventually have to learn some level of gunsmithing.   After taking some of my guns to gunsmiths and having to wait for months to get simple things done, it’s good to pick up an AGI video and do the changes yourself.   The same goes for gun magazines.   Parts on a gun magazine can wear out and depending on how much you spent on the magazine, you may want to just toss it in the trash.  For some magazines, you will only have to replace the springs to get it back to reliable functionality.

Gun magazines have various levels of quality.   Some gun magazines are meant as throw aways i.e. 1911 magazines made in Tawain.   I have several 1911 GI magazines that were pretty good range mags, but when they jammed up on me, and I could blame it on the gun springs, it was time to toss them.   Buying Wolff gun springs that cost about $8 for an $8 magazine isn’t really worth my time, plus I’ve found that many of these have worn out followers and it’s really not worth the headach to tweak them, plus I’d consider them to not be worth using for self defense.   Wilson Combat and Chip McCormick make very good gun magazines and both of them should help get your 1911 to be more tolerant of various types of ammunition.

There seems to be a new craze in competition shooting in recent years.   I’ve seen more high school boys coming home from class with Zombie survival guides, the recent 28 Days later type movies and the doomsday virus outbreaks.    I guess IDPA has lost some traction to the present generation, but I’ve attended a few Zombie survival competitions and they were very good training events.   The best thing about it was the amount of tactical gear that I watched fail, and the number of really novice mistakes people made.   Out of the 5 stages I attended, there was 1 stage that we saw about 18 firearms go down.   About half of those were AK variants and they were mostly magazine related.  Some guys never knew how hard it was to do a tactical reload on an AK if there was a round in the chamber and a fully loaded 30rd magazine.  People found out what happens after firing off the 1st round and the magazine falls out.

Do search for gun clubs and shooting ranges in your State to find out if anyone is holding a Zombie shoot.   They usually occur in the September to October months.   Having some good tactical clothing that will securely hold your gear.   The Eotac Style 201 pants are my favorite because they hold 6- 30rd PMAGS and they are easy to run in.   Tactical vests like the Style 101 are not heavy and don’t make you feel like you are wearing a flak jacket.   There is a time and a place for different types of tactical vests, but mobility is important.  You may want to try getting your magazines loaded up with all of your gear and then try running 100yds with it and see what it feels like and if stuff starts to fly out of your pockets.   Mobility is extremely important.