All posts tagged 7rd Magazines

Finding balance with firearms and magazines

When you have found that you have the right handgun for CCW, sometimes you’re better off with a smaller capacity firearm and a spare magazin than carrying a full size auto with a lot of bullets.   I have never had a magazine fall apart on me, but I’m sure it has happened to some people, but that’s not the reason i carry a spare magazine.   I had a lot of after market magazine laying around when the assault weapons ban was going on and much of it was after market magazines.   I picked up several 10rd magazines for my Kimber 1911 guns only to find that they were not reliable at all.   The balance was absolutely terrible and there was no way i would consider carrying something like that in a holster.

When it comes to using magazines in firearms like the M16, I have heard a lot of my military friends say they liked the 20rd magazines because it was better balanced and they could get into better shooting positions lower to the ground.   I know there are plenty of ways to get down low on the ground, but let’s just talk about balance.   Wilson Combat magazines are the most reliable and drop free on my 1911s, but I’m still not a fan of anything other than 8rd magazines.  Some people claim they are reliable, but the weight of 10rds of 45acp on a spring and 7rds is considerable and even though people will argue this, I have not found them to be as reliable for as long.

Top

The ever changing tastes of gun owners

It may be just me, but I have noticed another change in the handgun industry of going back to the 1911 or 45acp firearms.   Back in the 1990’s during the assault weapons ban, some guns got priced out because the magazines were too expensive and many people just settled for what was the least expensive to own.   The 1911 got a lot of people back from the higher capacity 9mm thrill ride that Glock gave them and nobody complained.  Once the AWB was over everyone went back to whatever floated their boat.   The sale of AR15’s went through the roof and we saw lots of after market magazine manufacturers fall off the wagon and disappear.   I have noticed that after just about everyone and their dog picked up an AR15 or an M4 Cabine, worrying about  higher capacity handguns seemed to diminish.

If you have ever taken a serious Carbine class, the capacity of rounds your backup gun held really wasn’t something that came up.  If your primary weapons went down, any secondary firearm was your backup.  If you couldn’t get your primary back up and running you’re probable screwed.   I usually only carry a 1911 with 2 spare Wilson Combat Magazines. I never liked the idea of packing too many pistol rounds and was more inclined to pack extra gun parts like a spare bolt or firing pins rather than more than 2 pistol magazines.  My secondary weapon is meant to fight my way back to getting my primary back up and running.

Top

Been playing with my 1911

No that is not a joke about something else,  but I have been shooting Glocks almost exclusively over the last year and it’s nice to go back to what I really love and have fun and not have to deal with the high paced tactical shooting programs that I have often had to deal with.   The 1911 still is King at the IDPA courses and that’s not going to change anytime soon.   There is something really addictive about the thunk of a 45acp round exiting a firearm and it’s not just the design, it’s the power that you can feel.   I will leave the ballistics debates up to the gun boards, but for knocking down steel targets, the 1911 is the ruler target drops.

I recently watched a video from Magpul Industries and Travis Haley mentioned that he did door knocking with a 1911 and actually used it in combat.   I’ve switched up to Chip McCormick magazines lately just to see if they are as reliable as the Wilsons Combat magazines that I have used for so many years. I just think its good to brush up on the #1 close up fighting pistol that so many Special Operations guys use.   The 1911 is still going strong in the military and the magazines and improvements have made it far more reliable than the original design.

Top

Uploading magazines, single stack and double stack

I use to upload all of my guns until a bad experience occurred to me with several of my gun safe firearms.   I mostly buy used firearms and my Sig 229 in .357 sat in a gun safe loaded with 12+1.   I bought the gun  used and replaced all of the magazine springs with Wolff gun springs, did a range test, and then when the gun passed the range report, I loaded it up and put it away in the safe for 9 months.  Thinking that taking this gun to an IDPA match would be a good way of testing it out and making sure it was reliable, I just took it with me and give it a run.

I had another Sig 229 with me, but this was in 40 S&W and it was also loaded to capacity.   Needless to say, both guns failed on me.   I  have a Colt 1911 with 8+1 rounds of 45acp in a Wilson Combat magazine and it has never failed me.   The only problem I have with it is that I need to really make sure the magazine is seat properly because it barely clicks in.   All magazines have been downloaded by at least 1 rd and since then, all of the guns have passed range tests even after long term storage.  Be careful about what you read on the internet, uploading many guns for long periods of time will decrease reliability.

Top

Tactical holsters for secondary firearms

One of the first holsters I ever purchased that was not specifically for concealed carry was an Uncle Mike’s gun holster.   It had a metal clip that that was very secure on a belt, and it was made of nylon.   It worked very well for me for several training sessions and it had a front pocket that could hold a double or single stack magazine with a velcro strap to secure it.   I never had a real problem with the holster since it is made of nylon and isn’t as harsh to lay down on as a paddle holster.  Many paddle holsters aren’t going to tolerate roll overs.

I have thought long and hard about what type of handgun to have with me as a secondary firearm and the thought came to me that it really should be all about up and close fighting and then flee the situation and clear my primary and get back into the fight with that.   I don’t carry about caliber wars between 9mm and 45acp, I will gladly fight a handgun battle with an M4 Carbine.   My secondary firearm is a  fitted with Wilson Combat magazines for a Colt 1991A1.   I carry one mag in the gun, and 2 in a vest pocket.   I don’t think over loading myself with handgun ammo is a good thing and 24rds of 45acp is good enough for me to fight my way out of a situation.

Top

Has anyone made plans for a Mapgul pistol mag?

I’ve been getting good at sensing changes in the gun industry and I think we’re on the precipice right now.   Synthetic stocks are far superior to what was out a decade ago and machining has improvement so well on the AR15 design that even the direct impingement guns are superior to what was out a decade ago.   I think  if you have the money to spend, you can get a good DI gun that is as reliable as a piston gun.   On the discussion of rifle magazines, once you get to the point that you can drive your car over a magazine and then still reliable shoot it in your gun, you have arrived at the top of the mountain.

I think Glock magazines are pretty tough, but I’ve never seen somebody drive over one with a car and still have it run.  If anyone has seen a pistol magazine as tough as the Magpul Pmags let me know? Wilson combat magazines are the most reliable gun magazines, but I don’t think any 1911 magazine would hold up to a 200lb person standing on it let alone a 2 ton truck.   Maybe we don’t need gun magazines to be this tough, but I sure think that if we can improve the light bulb, we can improve the handgun or pistol magazines.

Top

Flush fitting 1911 magazines

I am pretty much stuck on Wilson Combat magazines for my 1911s but I am aware that not everyone likes the way they are extended on the base pads.   I am also not an IDPA guy, but I’ve attended a lot of events and I don’t really see much more than Wilson and Chip McCormick being used.    The Chip McCormick magazines from what I have seen are pretty much a toss up when it becomes a relibility question between Wilson combat magazines and them.   There are several things to keep in consideration with each magazine you try.

The first thing I want is reliability,  I would have to say that I’d try 3  magazines with a manufacturer and rotate through about 250 rds and then declare them to work.   The second thing I want from a magazine is for it to drop free.  Giving the number of gun manufacturers out there I wouldn’t claim that Wilson Combat magazines are always going to drop free for you, but I find them to be the best in these regards.   The extended base pads can come in useful if you want extra grip on the magazine when removing it, but I don’t really notice that.   If I was shooting a short 1911 gun, I might notice the lack of flush fitting more.   My Sig 239 is a great CCW gun but if I had anything that wasn’t flush fitting for that I would probable not like shooting it.

Top

Valley Forge Gun Show in PA, finding gun parts

It has been  year since I got out to the Valley Forge Gun Show here in Pennsylvania.  It is probable the 3rd largest gun show after the Pittsburgh NRA Convention, and the Harrisburg Farm Complex.   There are some pretty big fluctuations from year to year.   Two Years ago there was a run on ammunition and firearms because Obama was elected.   Then move forward 2 years and there are a lot of good deals on used firearms because all of the people that lost their jobs are looking to get there money back.   I predicted that and I also predicted that there would be a reset on ammunition prices.

This weekend I went to the show to price gun magazines, ammunition, rifle accessories and reloading supplies.   I picked up large primers, small primers, pistol primers and rifle primers just because I could.   That was another thing that just flat out disappeared.   Primers seem to be under $30 now and that’s not too bad.  I next went to the pistol and rifle magazine section and picked up Glock 19 magazines.  I saw piles of Wilson Combat magazines, but I never noticed any shortages on those magazines, EVER. I noticed the Korean Glock 19 magazines looked well made, and they were only $10 each, but I didn’t want to take the chance since I knew nothing about their reputations.

Top

Does a small semi-auto CCW gun mean more fragile?

It sure use to mean that, but pocket guns have come a long way.   Defensive ammo has gone a long way in recent years and the 38 special ammo your grandfather used in Law Enforcement is not the 38 Special you have today.    I did some chrono tests with a Smith & Wesson Model 19 and the  feet per second velocity between that and j-frame Model 637 was dramatic.   I was breaking 1000ft per second with the j-frame and it really literally blew me away.   I always thought that having a 4 inch barrel on a gun meant that it was shooting a load faster, but not the case with these two guns.

A friend of mine told me that everything he thought he knew about ballistics was thrown out the door when he got his first Chronograph and I agree.   I also though that because a gun fit in my pocket that it had to be weaker.  I am still trying to unlearn what I had learned with pocket guns, but another buddy of mine did some ballistic tests where he proved that his 32acp penetrated ballistic gelatin as well as a 38 special.   While there is definitely some variations in results from firearms, the ammo you put in your Kahr PM9 and the 6rd or 7rd Kahr magazines that you are using, may be far more potent than you realize.   The Kahr firearms are probable one of the most durable small guns out there and they have had several improvements over the years that put them above their competitors.

Top

The Sig 220 vs the 1911 enthusiast

There has been much debate about the 45acp use in handguns.   With the number of shootings I have seen where 9mm bullets were used, I’d have to say that the 9mm is definitely not a powerful round, but I have heard of bad guys taking multiple hits from an M4 that kept on coming, so there are many things that can come into play.   The 1911 has remained a popular gun and not because it is the most reliable weapon in 45acp.   I have come to the conclusion that the modern polymer guns are superior to metal guns as far as durability and reliability, but many of them do have crappy triggers.

When the Springfield XD first came out, it was a big deal for 1911 guys to find something that wasn’t a DA/SA handgun and didn’t have a sponge trigger like Glocks do.  You can get a lot of improvement in reliability with a 1911 with good gun magazines like Wilson Combat or Chip McCormick.  I have respect for Glocks, but they do have an odd feel to them and are not traditional.  The XD 45acp felt more natural to a 1911 enthusiast and brought them into the modern world.   The 1911 still has one of the best triggers, but it is not in the same category as some of the guns being made in 45acp these days.   I have several Sig 220 that have been extremely reliable, but Glock has an edge over them as far as endurace.

Top
1 2 3 Page 2 of 3