All posts tagged AK cleaning

Otis 5.56mm grip cleaning kit

It’s been awhile since I’ve done a thorough check of my gun cleaning supplies, and today I decided it was time to do a brush check  to see if I need anymore gun cleaning brushes.  Some of the gun cleaning brushes I have seem to have really taken a beating and especially with my rifles, I thought it was a good idea to replace them because I didn’t know if they were really doing the job anymore.  I was  happy to find out that I completely forgot that I have an Otis 5.56 grip cleaning kit that was unused from over a year ago.

I met with a rep that worked for Otis at a few conventions and he hooked me up with a few of the Otis gun cleaning kits.  The Otis 5.56 grip cleaning kit is meant to fit exactly where you think it goes, the pistol grip on  your AR15.    These gun cleaning supplies are meant for AR15.  When I was cleaning my AR15 rifles, I was thinking that I should be using a chamber brush, unfortunately the Otis pistol grip cleaning kit doesn’t come with one.  I find that somewhat disappointing because I would think that any AR15 cleaning kit would come with one of these.  The chamber area is one of the hardest parts to get to on an AR15 and on a direct impingement carbine, this is where the most dirt can collect that usually causes jams.  The kit is nice for being a compact kit, but I’d still add a a chamber brush to it.

Top

Cleaning guns, the right way

The is a right way to do things and a wrong way to do things, there are also many ways to do get the same job done, but efficiency really matters to most of us.   I do admit that I like cleaning some of my firearms, some guns are really annoying to assemble and re-assemble.   The Ruger MKII is probable the most annoying handgun I ever owned, but my tolerances for complicated things has increased and I probable should have never sold it.   The real problem with guns like that is when you haven’t shot them in awhile and the learned knowledge floats out your brain.  I’ve read several issues of SWAT magazine where excessive gun cleaning can cause damage and after watching a recent DVD from Dean Caputo on the AR15 I thought I’d bring this up.

 

 

Boresnakes are definitely the fastest and easiest to use, but it won’t do a very good job on a really dirty chamber or in the bolt carrier of an AR15.  You will still gun cleaning supplies other than just CLP Break Free and a bore snake.   The Otis gun cleaning kits that are specifically designed for the M16 or AR15 is probable  the most complete gun cleaning kit for an AR15, but they gotta be used the right way.  One of the biggest screw ups I see with the cleaning tools are the chamber brushes.   The chamber brush is only meant to be pushed down so far and the fast majority of the ones I have come across look like someone tried to jam it down the barrel.  Watch what you are doing so you don’t damage the gun doing something you aren’t suppose to be doing.

Top

Time to get your gear in order and your gun cleaning supplies

There’s a certain point where a gun owners really can waste enormous amounts of time if they aren’t keeping there gun cleaning supplies in order.   There are lots of cleaning tools that will speed up your cleaning time and reduce the amount of money you’ll spend on cleaning pads and cleaning fluids.  I must have the same bottle of Break Free CLP gun cleaning and lubrication that I had 5yrs ago.   I hardly go through gun cleaning solvents because the tools that I am using now are so good at getting the debris and grud off the guns that solvents really only get used for cleaning the bore if I am using lead bullets.

Last year I got an Otis gun cleaning mat from my wife for a Christmas present and it’s really helped keep me from losing parts and messing up my living room rug. Otis gun cleaning kits are compact, versatile and easy to use on various firearms.   I’ve had a few issues with bore snakes and some of my semi-auto rifles and the Otis cleaning kits were great companions for people that want to clean a firearm on a firing range or on the road.   The tools that fit in some of the kits are great for the AR15 style firearms because some can be stowed in the grips or butt stocks.

Top

Some guns were not designed to be cleaned very well

My first semi-auto was a Russian SKS which was when they were going for under $100.   The Russian SKS is a very well thought out semi-auto because in my opinion, I like the operation and disassemble more than the M1 Garand.   I think the Garand is  a fine rifle and far more accurate than an SKS, but the stripper clips and lighter ammuntion is better suited for WWII combat although it was not introduced that early.   The AK ended the short adventure of the SKS much in the same way the M16 shortened the life of the M14.   They were all very well designed and reliable firearms, but they were not modern enough for combat.   One gun I have found that I still enjoy shooting and operating with is the FAL.   The triggers on these guns are a little hard to drop in weight, and the mounts on them really need to be locked in place with something other than just a screwdriver.   The .308 caliber will do a number on scope mounts especially exposing any operator failures to properly “lock it down”.

One thing that made me a fan of the DSA FAL I own is that it was designed to be easy to operate and maintain.   I’ve heard many firearm instructors that I respect say that the M16 does not need to be cleaned as much as people think and lubrication is more important than scrubbing every spec of carbon off the firearm.  I still enjoy cleaning some of my firearms just because I like inspecting the geniousness of the designs.   I literally can clean and FAL with gun cleaning supplies like the Hoppes bores snakes.  The Otis gun cleaning kits aren’t necessary on one of these guns and more appropriate for more complicated designs.  The FAL is hands down the simplest battle rifle to clean.

Top

Boresnake life span, are they worth it?

Are they worth it?  Do they hold up to heavy use?   I have the same 22 caliber bore snake and it has been used in 22LR rifles, AR15 rifles, M4 Carbines, AK74 and Mini 14s.   The same bore snake is approximately 6yrs old and probable gets used about  50 times a year.   I usually run the snake through the gun about 2 times.   I may only need to do it once, but i’m use to using cleaning rods and just get in the habit.   I almost only use Break Free CLP on my firearms, and the occasional grease application, and gun cleaning is now simple.

Cleaning revolvers is probable easier than some semi-autos because there is nothing you really need to disassemble.   I have been using the Hoppes boresnakes for rifle the majority of the time because handguns just don’t seem to be that much of a hassle and I’m really not that worried about how clean the barrels are for any particular accuracy reason.    When it comes to cleaning out a bolt action rifle like a Winchester M70,  It sure does make a difference in cleaning time when you do a one, two, and then just wipe the gun down and put it away.   If you clean the guns often, from my experience there is very little worry about hard to clean areas.

Top

Watch it with those gun patches

I will admit that I have stuck gun cleaning patches in some of my firearms.   I tried to do a fast clean with a Hoppes gun cleaning kit patch on a 22LR and punched a whole through the patch and had trouble getting the cleaning rod out of the firearm.   Another time I used a wrong size cleaning patch on a Otis gun cleaning kit and almost broke the wire trying to get the patch out.    I read something funny on the internet about this happening to a few other people and they had to put the gun in a vice or wrap the cord around a tree and  yank.   That’s never a good thing.

There is still nothing wrong with using a cleaning rod, but I think boresnakes really did do damage to the old cleaning rod relic sales.   When you can simplify your gun cleaning supplies, and you can cut down on the amount of exposure to the toxic chemicals, you really are sold on upgrading your gear.   I still haven’t gotten around to putting an Otis gun cleaning kit into my butt stock or grip, but I may do so in the near future.   Cleaning brushes are something else I hate dealing with because if you don’t keep them organized, it’s hard to tell which caliber is for which, and you’ll know soon enough when the gun isn’t getting cleaned.

Top
1 2 Page 2 of 2