All posts tagged FAL cleaning

Multi-gun gun cleaning solution, Hoppes Boresnakes

Hoppes BoresnakesWe still get people that are using 3 piece cleaning rods and out dated gun cleaning solutions like Hoppes #9, and if you want that toxic stuff in your cleaning kit, that’s your call, but there is a certain point you should really consider getting rid of some of the chemicals in your home, and at a certain level of being exposed to lead and other toxic materials in this industry, using gloves, good ventilation are things that are going to prevent bad things from happening.   Since I own so many 22 caliber firearms, my 22 Caliber boresnake and a once piece rod for 30 caliber semi-auto and bolt action guns are pretty much the majority of my cleaning tools.

Shotguns are a joke to clean and often my least cleaned firearms, but making sure they have a level of corrosion protection on them is pretty much all I worry about.  The only difference between rifle and pistol Hoppes Boresnakes are the length of the cord.  I still have a pistol rod that gets used on AR15 chambers because a boresnake isn’t going to get into all of those chamber areas, i’ve found that if you clean bolt action rifles right away, boresnakes get lift all of the crud out and you won’t need to resort to cleaning patches or cleaning rods, if you do wait it might take some more effort to clean the rifling.  Boresnakes general, when it comes to calibers, but I do have some issues with revolver cylinders not getting cleaned with boresnakes.  I still have to take a q-tip to clean out my Ruger Single Six, probable because lead and not copper coated bullets do the dirtiest work, so don’t expect these Hoppes snakes to work for everything, but when they work, they really do save time.

Top

Slip 2000 gun cleaning and more

Hoppes Boresnakes are the fastest cleaning kits in the world.   There’s no need to worry about storing cleaning rides and worrying about bending or breaking them.  The Bore Snake is also easier to use with some types of semi-autos.   You won’t need to use as many gun cleaning patches, or gun cleaning rods and gun brushes The Ruger Mini 14 is a classic example of this.   Most firearms can be cleaned from the breach forward, but something like a Mini 14 can not due to the design of the bolt carrier.  A bore snake can easily be inserted into the breach of a Mini 14 or Mini 30 and cleaned properly.   The bore snake can also easily be stored and does not take up any room.

One pass loosens large particles, scrubs out the remaining residue with a bronze brush, then swabs it all spotless with a cleaning area 160X larger than a standard patch. Add a few drops your favorite gun cleaning supplies  or Hoppes Elite and your guns ready for storage. The bore snake is caliber specific so make sure you get the correct one for  your pistol, rifle or shotgun.   You will also notice your gun cleaning time will be cut in half or more.   I’ve cleaned more than 4 firearms in an hour, from AKs, FALs, M1A, Mini 14s and AR15 rifles all will accept the use of the Hoppes boresnake.

Top

More feedback on the Otis System

I recently had a walk in customer look up at all of the Otis gun cleaning systems that we have in stock and mentioned that he never got into the Otis thing.   Well, the gun rod thing works well if you have a good cleaning rod and not one of those 3 piece starter kits that you got for your 22LR.   I’ve bent them myself and seen others do catastrophic things to them.   I’m not going to rave that the Otis System works better than any cleaning rod system, but there are advantages.

About the only disadvantage of the Otis system is that you might not be able to push forward on the cleaning patch as well, but yet again, what the hell are you doing that you need to push a cleaning rod that hard?   The Otis gun cleaning kits are small, compact, they hold the lube, and there is almost no chance that you will have to carry a bottle around with you that will leak all over your gear.   The cleaning systems are advanced or simple and can be used specifically for an AR15 style rifle.

Top

Cleaning guns, the right way

The is a right way to do things and a wrong way to do things, there are also many ways to do get the same job done, but efficiency really matters to most of us.   I do admit that I like cleaning some of my firearms, some guns are really annoying to assemble and re-assemble.   The Ruger MKII is probable the most annoying handgun I ever owned, but my tolerances for complicated things has increased and I probable should have never sold it.   The real problem with guns like that is when you haven’t shot them in awhile and the learned knowledge floats out your brain.  I’ve read several issues of SWAT magazine where excessive gun cleaning can cause damage and after watching a recent DVD from Dean Caputo on the AR15 I thought I’d bring this up.

 

 

Boresnakes are definitely the fastest and easiest to use, but it won’t do a very good job on a really dirty chamber or in the bolt carrier of an AR15.  You will still gun cleaning supplies other than just CLP Break Free and a bore snake.   The Otis gun cleaning kits that are specifically designed for the M16 or AR15 is probable  the most complete gun cleaning kit for an AR15, but they gotta be used the right way.  One of the biggest screw ups I see with the cleaning tools are the chamber brushes.   The chamber brush is only meant to be pushed down so far and the fast majority of the ones I have come across look like someone tried to jam it down the barrel.  Watch what you are doing so you don’t damage the gun doing something you aren’t suppose to be doing.

Top

Some guns were not designed to be cleaned very well

My first semi-auto was a Russian SKS which was when they were going for under $100.   The Russian SKS is a very well thought out semi-auto because in my opinion, I like the operation and disassemble more than the M1 Garand.   I think the Garand is  a fine rifle and far more accurate than an SKS, but the stripper clips and lighter ammuntion is better suited for WWII combat although it was not introduced that early.   The AK ended the short adventure of the SKS much in the same way the M16 shortened the life of the M14.   They were all very well designed and reliable firearms, but they were not modern enough for combat.   One gun I have found that I still enjoy shooting and operating with is the FAL.   The triggers on these guns are a little hard to drop in weight, and the mounts on them really need to be locked in place with something other than just a screwdriver.   The .308 caliber will do a number on scope mounts especially exposing any operator failures to properly “lock it down”.

One thing that made me a fan of the DSA FAL I own is that it was designed to be easy to operate and maintain.   I’ve heard many firearm instructors that I respect say that the M16 does not need to be cleaned as much as people think and lubrication is more important than scrubbing every spec of carbon off the firearm.  I still enjoy cleaning some of my firearms just because I like inspecting the geniousness of the designs.   I literally can clean and FAL with gun cleaning supplies like the Hoppes bores snakes.  The Otis gun cleaning kits aren’t necessary on one of these guns and more appropriate for more complicated designs.  The FAL is hands down the simplest battle rifle to clean.

Top

Boresnake life span, are they worth it?

Are they worth it?  Do they hold up to heavy use?   I have the same 22 caliber bore snake and it has been used in 22LR rifles, AR15 rifles, M4 Carbines, AK74 and Mini 14s.   The same bore snake is approximately 6yrs old and probable gets used about  50 times a year.   I usually run the snake through the gun about 2 times.   I may only need to do it once, but i’m use to using cleaning rods and just get in the habit.   I almost only use Break Free CLP on my firearms, and the occasional grease application, and gun cleaning is now simple.

Cleaning revolvers is probable easier than some semi-autos because there is nothing you really need to disassemble.   I have been using the Hoppes boresnakes for rifle the majority of the time because handguns just don’t seem to be that much of a hassle and I’m really not that worried about how clean the barrels are for any particular accuracy reason.    When it comes to cleaning out a bolt action rifle like a Winchester M70,  It sure does make a difference in cleaning time when you do a one, two, and then just wipe the gun down and put it away.   If you clean the guns often, from my experience there is very little worry about hard to clean areas.

Top

Otis butt stock cleaning kit

The first time I ever got a hold of an Otis gun cleaning kit I was kinda overwhelmed with the amount of brushes and tools that were in it.   It was a universal rifle and pistol cleaning kit and I was kind of bothered by how much stuff was jiggling around inside the pouch.   I know now that this was a little more than what I really needed, but once I figured out how to use the kit and what all of the tools were for all of the other cleaning kits from Otis were easier to use.   This is from someone that started out with a bolt action 22LR rifle and a Hoppes gun cleaning kit from K-Mart.

The gun cleaning that I have grown to hate usually is from the AR15 direct impingement guns I own.   I have heard numerous firearms instructors tell me that there is such a thing as too much cleaning, and knowing exactly what parts to lube and clean on an AR15 is the key to firearm maintenance.   The Otis gun cleaning kits I use now are specific to the firearm I am cleaning. Hoppes boresnakes have served me well, but getting into the parts of an AR15 especially the locking lugs is difficult without an AR15 brush designed for that type of chamber.  There are times you will need to literally scrape the locking lugs of an AR15 and Otis has the tools and gun cleaning kit for your needs.

Top
Page 1 of 1