All posts tagged Glock 23

What do you want with a pocket holster?

This is one of those issues that I have lots of first hand experience with but you would think that it’s a simple way of carrying a firearm.   I still run into  people that don’t use holsters but in the age of Glocks and firearms with no safeties, I do not think it’s a good idea to have a firearm in tow that does not have it’s trigger covered.   If you wouldn’t carry a knife that is un sheathed why would you carry a fiream without a holster?   I have tried to carry firearms in my pants pockets several times in the past but I have had several failed attempts.   Both times I was carrying j-frame revolvers and either the gun didn’t sit deep enough or I had snagging that was unacceptable.

I’ve used Uncle Mike’s pocket holsters in the past and they were OK, but I’ve taken fabric scissors to them and had to make adjustments to avoid the snagging issue.   One of my favorite new Desantis holsters is the Desantis Nemesis, they are more money than the Uncle  Mikes pocket holsters but they do a better job of slipping free when you pull your firearm.    Pocket carry is something you really have try out with your clothing and your method of carry.  I’ve seen guns fall  out of pockets when people go to picnics and that is bad.

Top

CCW holsters can become complicated are they worth the hassle?

We recently had a few guys being deployed to Afghanistan that were looking to get Molle vests but they heard about an Elite Survial quick detach one that is coming out.  These guys all knew what it was like to get into situations where you have so much stuff strapped on you that it can be life threatening if  you get snagged on something or need to drop the load and move somewhere.   It’s also a comfort thing to some degree because if you can take it off quickly you aren’t wasting time.   The same goes for getting the stuff on which is why quick release gear sells faster.   Shoulder holsters can be very comfortable to wear especially for large autos but they are hard to get in and out of.

When it comes to waking up everyday and putting on a gun, nobody that CCWs for a long time is going to want to spend extra time with the hassles of clip things here and there and make adjustments.   The Galco Kingtuk holsters are a good idea and more comfortable but for every day carry they are little bit of a hassle to get on and off every day.   I will say that I use them for social environments and not for work because of the comfort levels but thats something for the buyer to decide.   Galco glock holsters  and Galco 1911 holsters are outstanding leather holsters.

Top

USMC now adopting Blackhawk Serpas

Not only has there been a huge a huge order submitted to Trijicon for the ACOGs, the USMC has now officially adopted the Blackhawk Serpa holster as the official USMC gun holster.  Well, I have to say this,  I’ve been  one step ahead of the most powerful military in the world since I have personally already adopted the Blackhawk Serpa as the official gun holster for Rogue Elite employees.   When it comes to working, running and as the military knows, fighting a war, losing a firearm or having it fly around is a bad idea.  Velcro and gun straps are hard to re-engage under stress and the Blackhawk Serpa design isn’t.

Keeping  your finger off the trigger until you are ready to shoot is one of the basic firearm safety rules and the holster designers at Blackhawk knew this.  When you are drawing you gun from your Blackhawk Serpa holsters, if you are practicing your basic firearm safety rules, you will easily be able to release the firearm from it’s holster.   Locking it back into place means just dropping it into the holster.   There are also easy ways to modify the firearm on your leg, belt or vest and the Blackhawk Holster platform gives you a spot for  holster or for carrying more gun magazines.

Top

Galco Kingtuk holster review

I’ve been wanted to get a Crossbreed holster for a long time, but they seem to be a little complicated for me to order online and I always wanted to hold one in my hands first before I purchased one.   It seems that as soon as someone comes up with an idea, and a good idea, somebody in the tactical and accessory market tries to copy it.   I’ve heard stories from guys attending SHOT Show that had to chase off Chinese attendees because all they did every year was show up, find out what’s new, and take the pictures back to China and then try and  make a knock off version of it.   We’ve seen this with optics time and time again.

I’m gonna keep my mouth shut on who is copying whom, but since Galco has such a large selection of holsters, and they cover a wide selection of right hand and left hand holsters, we gotta go with the best and most versatile product lines in this industry.   Galco holsters almosot always take a few days or more to break in.   This leather kydex combo Kingtuk holster was no different.   I’ve had times where the leather holsters were so tight that I thought I had to send them back because it was defective product.   I’ve learned to be more patient with leather holsters.   I think  the Kingtuk is a good idea and yes, it does not dig into you like a regular IWB holster, but I find them difficult to get on and off every morning, maybe I need Coffee first.

Top

Pocket guns and laser grips

While I was recently at the NRA Convention in Pittsburgh this month, the biggest buzz was going on over at the Ruger area.   I’m still waiting for more feedback about the Sig 238 and I’ve already learned to not jump on newly produced firearms.   There are always recalls and product alterations in the first few years and sometimes the changes are considerable.   Extractor flaws, slide cracks and sometimes something as simple as a trigger pin or screw can fail on a design.   The Ruger LCP had some issues when it first came out, but considering the number of holster designers that are making holsters for this gun and the recent surge in CCW pocket guns, this is hands down the number one gun.

I think the mentality around this type of CCW gun is that it is the smallest most concealable firearm that looks good and is fun to shoot.   Some pocket pistols are not fun to shoot and are high maintenance. Another thing that helps improve the usefulness of the firearms is the Crimson trace laser grips that attach in a very good way.   I’ve got a few older model crimson trace laser grips and I see that the biggest flaw is that the laser is on the side of the firearm and can get blocked if you do not grip the firearm properly.   The proper place for a laser is as close to the muzzle as possible or at the least right under it.

Top

Issues with carrying pocket CCW

I really hate to have to bring up some of these discussions because you don’t want to volunteer bad behavior stories to the anti-gun crowd, but I’m also not a fan of drunk drivers and people that talk on their cell phones while driving.  My first experience in witnessing stupid CCW holders was when I met a guy that got his first CCW gun and it was a desert eagle 44 magnum.    Do I really need to explain this one to you?   I don’t know any police departments that would allow a cop to carry something like that in a urban environment and I’d have to question the level of training someone had before they thought to deploy a gun in that caliber.   I think there would be more times that I would second guess taking a shot because I would be afraid the bullet was going to end up in the next city over.

When it comes to pocket carrying, there are now CCW pants that will help retain your firearm if you are laying down or need to lean back.   I’ve seen guns fall out of holsters and they can fall out of pockets.   I’ve lost pistol magazines because the mag holders didn’t work in horizontal positions.  Don Hume holsters have a front pocket holster that is added security and will help keep pocket lint out of many parts of a gun.   There is always a learning curve when it comes to CCW and you’ll find out real fast which clothing builds up lint faster.   Holsters can help keep a gun reliable and prevent you from having to strip the gun down all the time because it’s getting cluttered with things that should not  be in there.

Top

Buying used firearms and starting over

There is nothing wrong with buying used firearms.  Some of the best deals you will ever get on handguns are used police trade ins.   In recent years, buying a used Glock can save  you $100-$200 dollars and if you factor in how much magazines cost, you can get a very good condition firearm and 5-8 gun magazines for the cost of just a new firearm which might only come with 1 or 2 mags.   There are now 4 generations of Glocks out there, but I really don’t have a preference.  If you like Glocks and the unique grip angle and  your looking to enter into gun ownership of one, buy a used one.

If you happen to have one that you either A. wear it out B. got one with a shot out barrel you can start over by replacing the Glock gun parts.   I suggest looking up Glock disassemble on youtube or get a Glock Armorers video  to replace the smaller parts, but replacing barrels is as easy as clicking your fingers. Glock barrels will run you $100-$200 in general and if you are fortunate enough to have worn one out.  I think wearing out a gun is an honorable as wearing out the frets on your Fender Bass, it’s a badge of honor.

Top

Paddle holsters vs. OWB holsters

There have been several occasions where I have had to sit down and re-read all of the various holsters designs being made from the major manufacturers to read about any chances or variations that have been made.   Last year we saw a big increase in people buying .380 guns and not very many holsters were being made for it yet.   There are also things like lasers that come into play and that limits the types of holsters you can use even more.   I expect that since the Ruger LCR and LCP have been given a good reception in the gun industry that next year will be easier to find more options.   I still not on the .380 bandwagon, but if that’s what people want to carry, any gun is better than no gun.

I changed some of my work week carry methods after hobbling around with sore spots from the times I had to do a lot of lifting and working with my CCW gun and I have recently switched up some of my holster and carry methods to give my body a break.   For anyone that is actually carrying 7 days a week and does a lot of physical work, IWB with a medium or large size gun will catch up with you.  I  have found that the Galco holsters that are OWB holsters, that you have to put a belt through don’t work very for me because there are times during the day that I do have to take my gun off because I am going through various buildings with high security measures and it’s annoying to have to practically undress in a car each time.   One thing I throw into my CCW mix is a good Galco paddle holster like the Havana.

Top

Replacement parts are inevitable

Glock PartsWe all know that Glocks are tough, I won’t say they are the toughest because there are other guns out there that may be as tough, but they are in the top tier of firearms.    We know that everyone likes to talk and argue about all of the flaws in firearms and which guns are more reliable than others.  Some handguns are meant for concealment and are not combat worthy and aren’t expect to put 500rds through them without cleaning to function flawlessly.

The reality for all firearms, though, is they all will jam or break at some point.   All barrels wear out, all springs weaken,  all extractors will eventually wear and break and so will firing pins.   If you are a Glock owner, storing a few extra Glock Parts may be a good idea.   You have a combat worth firearm that is meant for brutal use, but having recoil springs, magazine springs, firing pins and extractors in your range bag or in your home is a good idea.    Learn to assemble and disassemble your handgun and you’ll know how to do your own gunsmithing and repairs yourself.  Glocks may be one of the easiest guns to maintain and that also means replacing the parts.

Top

As tough as the gun ?

Glock MagazinesSomething like a 1911 has a questionable reliability track record depending on the conditions they are used in and the type of magazines they are using.   Pistol magazines have evolved and improved as much as firearms and the reality is metal guns aren’t in the same category as polymer guns just based on lubrication and climate conditions.    There are many firearms out there that will function reliable if lubricated properly and cleaned properly, but polymer guns are the future.

Glocks are the toughest handgun in existance according to the most experts.   There are always arguments about the conditions various firearm manufacturers are in and how they will handle it, but the reality is the Glock pistol needs less lubrication, doesn’t rust, and the magazines are designed as reliable as the gun and there are plenty of Glock Magazines on the market to void out the mayhem that aftermarket mags can do to a firearms reputation.

 

Top
Page 1 of 1