All posts tagged Kimber 1911 magazines

1911 magazines, manufacturers of mags and how reliable they are?

Chip McCormick magazinesI don’t know the answers to all of the 1911 magazine questions but I do know that standard GI magazines are really not the best thing to run in a 1911 if you are carrying for protection.  I have a ton of them I use for range mags but they don’t hold up very long.  GI magazines are meant to be throw aways, and if you compare them to the M9 magazines, there is an obvious durability difference.   I’ve replaced springs and followers on magazines and it’s really been worth all of the efforts.   On something like a Glock magazine or a Magpul Pmag, I’ve replaced magazine springs and occasionally a follower.   Some gun magazines are so inexpensive that you might as well just toss them rather than have to tweak it the whole time.

It’s always good to keep your eyes open for manufacturers that have good warranties and the Chip McCormick 1911 magazines that we sell are good about that.   I guess the thing that Chip McCormick magazines knows is there are finicky 1911 guns out there and if there mag doesn’t work in  your gun they’ll replace it.   The Chip McCormick power mags are really the ones you want to use if you are putting  a lot of lead downrange.  The 8rd magazines are really the most common for CCW and even though the 1911 was issues with 7rd magazine, I have personally  had no reliability issues with any of the 8rd power mags that I have.  The Chip McCormick 10rd magazines are very popular for IDPA and Competition shooters but they do throw off the balance of a 1911 in my opinion.

Top

Wilson Combat Magazines vs everyone else

I’ve mentioned many times in my blog posts that my first handgun was actually a Colt 1991A1 and I got a screaming hot deal on it.  $375 out the door for as far as I know an unfired firearm that was brand spanking new.   My first experiences with it were like many, it did not run out of the  box and I had to do some minor tweaks to my approach for carrying this firearm, what type of ammunition to use and what type of magazines.  I only had 1 magazine with it when I got it and it did not last more than a couple reloads before the magazine lips started to bend and the gun would close on an empty chamber, the problem was that I was using USGI magazines that are in all practicality, throw away magazines.

There are many new fancy 1911s out there Kimber is what I consider fancy as well as Les Bauer.  I have seen plenty of feeding problems for people that did not use Wilson Combat Magazines and eventually they figure it out and go to an online discussion forum and find out what works best. We recently noticed that some companies have upgraded their standard magazine capacities have learned the technology to do that, I have not found any truth that the Wilson Combat 8rd magazines were less reliable than the 7rd magazines.  I think an 8rd 45acp is the best option since 10+ rounds of 45acp tends to make the guns too heavy.

Top

Be careful about about how much screwing around you do with your 1911s

I’ve had many family members and friends ask me to go shopping with them to help them pick up a firearm.  There have been many times that I have warned people about buying a certain gun even though it looked like it was a good price.  Many of the times it was a firearm that had obviously been customized.  The biggest warning sights are usually when the triggers have been changed.   That can mean that somebody was lessening the trigger pull weight and it’s also a hint that it was turned into a target gun and there may be other parts like springs or buffers inside it.   I have a family member that purchased a 1911 because he had one in the military and the one he eye balled at a gun store had exactly these issues.

After we took this firearm to the gun club it actually jammed up on us several times, I tried to take it apart to see what the spring looked like but it had a full length guide rod and I did not have any familiarity with that.   We even tried several of my wilson combat magazines that usually solve many 1911 problems but the gun still hung up.   We later found out that there was a tool we needed and there was in fact a buffer that was decaying inside the gun and causing all of the malfunctions.   There are so many new 1911s out there, Sigs, Les Bauer, Kimber ect. that you have to watch the amount of tinkering people do with them because not all of the 1911 parts and especially holsters are going to work with them.

Top

Colt 1991A1 and Chip McCormick magazines range day

I have worn out more 1911  magazines than any other gun magazine and I guess it’s no surprise that I put a lot of 45acp down range.   My 45acp magazines get put to use and I have learned from experience to rotate through all of my 1911 magazines and replace the springs about the same time I replace my recoil springs.  All of this can depend on how many magazines you use for the most part.    I would always recommend that you have atleast 3 gun magazines for every handgun you own because not only does this spread out the gun magazine wear, it’s about what  you will most likely need if you are doing any type of competition shooting.

I have a Colt 1991A1 that has seen more action than any other sidearm and I refuse to do any major changes to it as long as the gun runs.  The gun fits my hand very well and I have had good luck with the proven Chip McCormick magazines that I have used for IDPA competition and for CCW.   I love my 1911s for competition shooting but I’m still searching for a 45acp gun that I can carry all the time.  Some of the shorter 1911 guns seem to be to much too much maintenance and I really don’t like the idea of carrying a firearm where I have to do a countdown to when it it needs to have its guts cleaned out.

Top

Is a 6.8 SPC worth getting?

That is a question we get quite often around here and we always throw a question back to a customer.   People call or show up wanting us to give them advice but there are a lot of liabilities in telling people what to get or do.   So much of gun accessories and firearms has to do with the job at hand and a persons gun skills.   I’ve heard people claim that you can’t shoot long range with a 5.56 gun but I see it done all the time at local gun clubs.   Sure there are instances of high wind where a 5.56 bullet isn’t going to do very well, but sometimes only a 50 bmg is going to get the job done.

Even the trusty and reliable Mini 14 is an often over looked hunting Carbine, but I’ve seen white tails taken up in Vermont with 75gr expanding rounds.   The 6.8SPC would be a more powerful round than what the military is using today but it’s not really going to solve all of your problems.  Most of my friends that own them are using them for hunting rounds and not even for Carbine training ect.  The only problem you may run into when changing uppers in with the gun magazines.  The 5.56 round is better than any handgun round if you use the right kind of ammunition and the AR15 platform gives you lots of caliber options that are really best for upgrading your gun for better hunting.

Top

Magazines that aren’t flush fitting

I have never really liked the feel of having a pistol magazine protrude out of the bottom of the gun unless it is because the gun grip is too small for me.  I’ve seen a few of my friends do this on their Glocks, namely the Glock 26 because it is such a small gun.   I did put an extension on a Sig 239 which is the  only gun I currently own that has this.   The first gun that I owned was a Colt 1991A1 and it only came with one pistol magazine.   It was a Colt magazine which i thought would be the best gun magazine to have, but that turned out to not be true.   After having a few problems with the slide stop not catching, I found out the magazine tab was bending and causing the issue.

I believe it was at a gun show that I picked up 2 Wilson Combat magazines and my Colt 1991A1 ran flawlessly with ball ammo.  The gun magazines really ran well with hollow point ammunition but I found the gun to be too picky with hollow point ammo that I pretty much gave up on worrying about it.   If you look at the velocity that a 45acp is flying at, I don’t think you’ll have massive over penetration issues compared to 9mm ball.   Wilson combat magazines have varying base pads and from my experience this is mostly a concern for competition shooters.   If the magazine drops free I don’t need to worry about gripping it and pulling it out for a fast reload.

Top

Another public service announcement

There are some things that I have to watch myself with because I can get too repetitive when dealing with some of my gun friends, but when it comes to public safety and gun ownership there are things that I am forced to re-iterate every year.    I was recently made aware of an incident where a novice gun owner went out and picked up a Kimber 1911 and was learning to shoot with it.   After probable putting about 1000rds through the gun it sat in his home unloaded for several months.   Just this past weekend he was in a hostile situation and ran up to his bedroom to retrieve it.

The gun was not loaded when pulled it out of his closet but he had ammunition standing when he loaded the magazine up the feed lips where so worn out that the bullets came loose when he popped it back in the gun magazine.   The manufacturer of the firearm was not important, but it is not wise to only have one magazine for a self defense weapon.  I rotate all of my Wilson Combat magazines for my 1911s and actually use GI magazines for range mags.  The GI magazines are not as reliable and I actually like that because I can practice clearing malfunctions with them.  If they jam too much I just toss them.   Don’t mix your range magazines in with defensive magazines.

Top
Page 1 of 1