All posts tagged Kimber 1911

Revolvers and magazine capacity

I guess I’m getting old when I have to refer to my  years of chatting on gun boards because they seem to be something from so far in the past now.  Blogging and tweeting and Facebook seem to have replaced the discussion forum format.  I have watched so many of my friends transition from full size autos to small Kahr semi-autos and the Ruger LCP.   The .380 is still revered as underpowered, but when most people think about the likely hood of dealing with a threat and how much firepower they will need and how much weight they want to tote around, people are going with smaller firearms.

I’m not in the camp that thinks that the smallest caliber gun is fine, but if that’s what you want to carry, I won’t condemn it, but you better train to be able to fight with it.   One discussion that still rings in my ears from the gun forum years was that the 1911 pistol was out dated because magazine capacity was only 7 or 8 rounds while most modern 9mm service guns held 13-19rds.  Wilson Combat magazines have made the firearm more reliable, but it’s still a very heavy gun. Magazine capacity was the big thing in the 1990s but not so much anymore.   Most Police now have quick access to an M4 and over loading a handgun seems to be a thing of the past.   Do people still look down a 5 shot revolver now that all of those .380 pistols only  hold 5 – 7 rounds?

Top

Knock down power some range results

Sometimes ballistics testing can get too complicated and there are so many variables when it comes to testing a bullets performance that people really have to look at the results under realistic conditions and and realize that getting a hit is more important than which caliber, but when you compare hit to hit, there are differences in performances.    I’ve seen ballistic results where 9mm ball ammo was said to have hit with the same energy that a 45acp had, but I have seen multiple times that steel plates would not go down as frequently with 9mm ball ammo.   There were times when we heard  hits and nothing would drop.

Now that so many criminals are getting a hold of body armor, bullet penetration is coming more of an issue.   Even for those that are service over seas, 9mm ball ammo doesn’t penetrate a suicide bomber vest.  M855 is not very good for soft targets but against body armor it is.   We’ve been selling more Wilson Combat magazines to troops doing security detail because in their opinion 45acp worked better on soft targets and M855 was still necessary for penetration against suicide bombers and taking on cars.

Top

Flush fitting 1911 magazines

I am pretty much stuck on Wilson Combat magazines for my 1911s but I am aware that not everyone likes the way they are extended on the base pads.   I am also not an IDPA guy, but I’ve attended a lot of events and I don’t really see much more than Wilson and Chip McCormick being used.    The Chip McCormick magazines from what I have seen are pretty much a toss up when it becomes a relibility question between Wilson combat magazines and them.   There are several things to keep in consideration with each magazine you try.

The first thing I want is reliability,  I would have to say that I’d try 3  magazines with a manufacturer and rotate through about 250 rds and then declare them to work.   The second thing I want from a magazine is for it to drop free.  Giving the number of gun manufacturers out there I wouldn’t claim that Wilson Combat magazines are always going to drop free for you, but I find them to be the best in these regards.   The extended base pads can come in useful if you want extra grip on the magazine when removing it, but I don’t really notice that.   If I was shooting a short 1911 gun, I might notice the lack of flush fitting more.   My Sig 239 is a great CCW gun but if I had anything that wasn’t flush fitting for that I would probable not like shooting it.

Top

The AWB is over, so buy Factory Mags

When I stopped and thought about writing this, I couldn’t believe how many years it has been since the AWB has expired.  It feels like it was just yesterday that I could get Glock or Sig Sauer magazines without having to spend $60-$90 for them.   Factory magazines are still more expensive than some of the other magazines out there, but they are always the best option for handguns.   There are plenty of decent manufacturers for AK or AR15 rifles, and most problems I have seen with AK mags can be fixed with a simple file to the tab on the mag wells.    I recently picked up a couple Glocks and XD handguns because I wanted to bring something to the next class I teach that wasn’t a Beretta, Sig Sauer or 1911.   Some people just have issues shooting 45acp and I didn’t own anything other than a Sig 220 and a 1911.

I have found the Springfield Armory XD 45acp to be the most comfortable 45acp gun to shoot that was not a steel gun.  I find the Glock 21 to be too bulky especially for my female students.   The factory gun magazines for my Glocks are less expensive than  Sig Factory magazines, but I have never had to replace anything on my Sigs other the springs.   Wolff Gun springs work very well in all of my rifle and pistols and I have stockpiles of them so that if I notice any slowness in cycling, I can just swap them out.   Rotating your gun magazines is a good way of making sure you don’t wear out the same magazine, because it’s a pain in the neck when you are trying to determine if the magazine is bad or if a shooter is limp wristing a firearm during a training session.

Top

Valley Forge Gun Show in PA, finding gun parts

It has been  year since I got out to the Valley Forge Gun Show here in Pennsylvania.  It is probable the 3rd largest gun show after the Pittsburgh NRA Convention, and the Harrisburg Farm Complex.   There are some pretty big fluctuations from year to year.   Two Years ago there was a run on ammunition and firearms because Obama was elected.   Then move forward 2 years and there are a lot of good deals on used firearms because all of the people that lost their jobs are looking to get there money back.   I predicted that and I also predicted that there would be a reset on ammunition prices.

This weekend I went to the show to price gun magazines, ammunition, rifle accessories and reloading supplies.   I picked up large primers, small primers, pistol primers and rifle primers just because I could.   That was another thing that just flat out disappeared.   Primers seem to be under $30 now and that’s not too bad.  I next went to the pistol and rifle magazine section and picked up Glock 19 magazines.  I saw piles of Wilson Combat magazines, but I never noticed any shortages on those magazines, EVER. I noticed the Korean Glock 19 magazines looked well made, and they were only $10 each, but I didn’t want to take the chance since I knew nothing about their reputations.

Top

IWB carry for a 1911

I have always thought that carrying a full size auto meant carrying the gun in a paddle holster or a shoulder holster, but that like many other conclusions has changed.   I have never been afraid to just carrying one firearm and not have to worry about carrying backup magazines although I’m not going to tell you that  you need to do the same.  With the prevalence of people carrying cell phones on their belts, you do have to be careful about where you are placing  your spare gun magazines.   There have been times where I have noticed that certain types of shirts and sweatshirts and even some jackets will ride up too high on my waist when I am trying to retrieve my cell phone.

If I am going to an environment where deep concealed carry methods need to be employed,  sometimes we may have to stick to just one gun and avoid carrying spare magazines on the waist.   I have thrown spare magazines for my Colt 1911 in a pocket, usually my Wilson Combat magazines but I have found all too many times that my 5.11, Woolrich Elite or Eotac pants will eventually work a bullet out of the gun magazine and that’s not a good thing.   I think the only other deep cover option I would consider would be a ankle holster that could carry spare magazines for an auto.   The good thing about the 1911 design is it’s slick thin design.

Top

Reliability of the 1911 GI or MilSpec guns

My first 1911 was a Colt 1991A1 that I picked up for $375 for a gun shop.   The gun was hardly used and I don’t believe it was ever shot.  Every 1911 that I own has been had for under $400.   I have had maintenance issues with my Colt 1991A1, but I believe the gun has well over 10,000 rounds through it and I’ve made a few customizations to improve it.   I miss my gunsmith, but he did mess up something on the gun when I took it to him to have the feed ramp polished.  When he was polishing the feed ramp he hit the slide stop and put a niche in it that I noticed immediately after test firing that the gun would not lock back.   He found the mistake was his and fixed it, but I thought that it was a good time to replace the slide stop with an extended one.   When I put Hogue gun grips on Colt, it made the grips a little fatter and it was a little difficult to hit the slide release with my thumb.

I messed around with polishing the feed ramp and using Wilson Combat magazines and noticed a good improvement in feeding SWC and HP ammo, but I was still not happy with it not running flawlessly.   At this point, I don’t care, I’ve seen enough junks of wood fly out of the back of backstops to notice the difference between a 45acp and 9mm ball ammo to know that one type of ball ammo is better than the other.   I would never use 9mm ball in a defensive situation, but a 45acp is fine by my book.   I have also noticed absolutely no difference between Wilson Combat magazines that are 7rd vs 8rd.   I have done the 8 +1 in the chamber on several occasions and never noticed any reliability issues as long as the gun wasn’t stored like this for very long.   Even though I believe manual safeties aren’t the best type of device to have on a CCW gun, I think 8rds of 45acp ball ammo in a GI 1911 is not a negative.

Top

Gunsmithing and 1911 reliability

My first 1911 was a Seriea 80 which has a firing pin plunger, but in my opinion that was a good thing to add to the design and IMHO does not take away from the novelty of the firearm.   I have heard from so many of my friends that Kimber makes the best 1911s, but I still have yet to understand why I should bother spending over $1000 on  a firearm when I already own two 1911 handguns that cost me less than $400 each.   Springfield Armory GI models are very well made and I have had zero reliablilty issues with my guns.   I have to admit that I am not one to push the limits on the types of ammo that my guns eat and I think that may be the real reason I don’t have issues with them.

When I first carried for work, I carried a Colt 1991A1 and used hollow points, but I  had an awful lot of malfunctions with the 2nd round.   Not that often, but maybe about 1 out of 75 rounds might not seat all the way and I would have a stoppage.   I was told to polish the feed ramp and I did, and the gun did run more reliabile, but then I did have maybe 1 out of 300rds jam  on me.   I took a good look at ballistics charts and realized that a 45acp FMJ does enough damage and worrying about bullet expansion with such a large caliber was kinda pointless.   I wouldn’t get too caught up in doing too many tricks to get your 1911 to run reliable.   Find the ammo that really does work, in my case, FMJ and try sticking with Wilson combat magazines or Chip McCormick.  I mostly use 8rd mags and although there are some that claim that these are not as reliable as 7rd magazines, I have had zero issues.   One thing I do not do any longer is one up the magazines.  There seems to be some magazines seating issues if I force an 8rd magazine in the guns with 1 round in the chamber.

Top

1911 magazines wearing out too fast?

I’ve owned more than a few 45acp guns, basically for tests and evaluations, but I still love my 1911 handguns.  I have to admit that it still shocks me to see the number of gun malfuntions on firing ranges due to bad magazines or shooters not disengaging the thumb safeties during competitions.  In my humble opinion this should be a big warning to anyone that is carrying a 1911 style handgun, that they really need to do some research into the right type of 1911 magzines they should be using.   Although I would never feel out gunned  with a 1911, I stopped carrying them due to too many times I have missed the thumb safety during practice that I felt it wasn’t worth the time to keep practicing it when I could easily just switch to another type of gun.   I’m still not on the Springfield XD bandwagon, but many of my friends have jumped on that.  I do not think it’s a wise thing to carry a 1911 around without the safety engaged, but I would say that although the 1911 is a great competition and military gun, it has it’s place in the handgun community as much as a j-frame 38 special does.

There are many gun forums and places you can research 1911 gun magazines, the 1911 forum was where I first learned about swapping out various parts on my Colt 1991A1, and I have improved my shooting and reliability dramatically.   Wilson Combat magazines are my favorite, but Chip McCormick magazines seem to look more traditional and also have a very good reputation.   I have not had good experiences with GI magazines holding up for very long, and I also highly recommend paying attention to round counts in your magazines and recoil springs. Out of all of the guns I have owned, the Colts and Springfields I own do start to choke up after about 6000rds and become less tolerant of even just plain FMJ rounds.   If I had a round count like that using defensive HP ammo, I would expect problems much sooner.

Top
1 2 Page 2 of 2