All posts tagged non toxic gun cleaning

Slip 2000 Gun Cleaning Products Promotion Coming Soon!!

We have been Slip 2000 Gun Cleaning big fans of Slip 2000 gun cleaning products for a lot of reasons.   I’ve blogged about them before but we are still dealing with a high number of customers that don’t know that synthetic lubricants that work in your car are probable excellent options for your firearms.   The biggest positive thing I’d say about Slip 2000 is that it actually stays on the guns and I have yet to actually heat up a gun enough to the point where I didn’t see anything left.   In my opinion, if you can’t see lube on your firearm, it probable isn’t there.   I’ve seen guns start to fail at the end of matches several times because the number of rounds  you run through a firearm doesn’t mean the gun lube you are using is fine, it just means you may have not pushed the limit of the lubricant you are using and if you ever run a gun hard, you better watch out.

There are several product and sizes to choose from and it’s often better to buy the larger bottles because in the end, you save money.   Slip 2000 gun cleaning products like the Copper Cutter and the 725 gun degreaser are all in my cleaning area and I don’t feel the need to jump around to other brands when I already found something that works.   I have also added the Slip 2000 EWL30 on some of my .308 Semi Autos.   We will have a FREE SAMPLE display in our store for anyone interested in trying it out.   So plan on stopping in later this September for our Slip 2000 Promotion.

Top

Slip 2000 gun cleaning and more

Hoppes Boresnakes are the fastest cleaning kits in the world.   There’s no need to worry about storing cleaning rides and worrying about bending or breaking them.  The Bore Snake is also easier to use with some types of semi-autos.   You won’t need to use as many gun cleaning patches, or gun cleaning rods and gun brushes The Ruger Mini 14 is a classic example of this.   Most firearms can be cleaned from the breach forward, but something like a Mini 14 can not due to the design of the bolt carrier.  A bore snake can easily be inserted into the breach of a Mini 14 or Mini 30 and cleaned properly.   The bore snake can also easily be stored and does not take up any room.

One pass loosens large particles, scrubs out the remaining residue with a bronze brush, then swabs it all spotless with a cleaning area 160X larger than a standard patch. Add a few drops your favorite gun cleaning supplies  or Hoppes Elite and your guns ready for storage. The bore snake is caliber specific so make sure you get the correct one for  your pistol, rifle or shotgun.   You will also notice your gun cleaning time will be cut in half or more.   I’ve cleaned more than 4 firearms in an hour, from AKs, FALs, M1A, Mini 14s and AR15 rifles all will accept the use of the Hoppes boresnake.

Top

Gun Cleaning Supplies without all the smell and mess

I’ve tried to clean my firearms and use gloves to avoid contact with all of the chemicals but it was too much of a pain in the ass to get done.   Some of the gun cleaning parts as well as the take down pins on something like an AR15 are too hard to do with rubber gloves.    I’ve avoided using Hoppes bore cleaning chemicals for a long time because I’ve mostly learned that if you clean guns shortly after shooting them they are easier to clean.   I’ve used Break Free CLP on cleaning patches and it seems to get the job done on all of my rifles.  On my Winchester 30 caliber bolt action there was one time I had to use a bore cleaning to clean it.

The best thing to do these days is transition your gun cleaning materials to non-toxic chemicals.   The M-Pro7 gun cleaner is non-toxic and as I have rotated out many of my older gun cleaning supplies, and replaced them with M-Pro7 I have not had the smells and the light headed experiences nor the complaints from my family members about the smell.   Not only that but the carbon remove really works well and the 32oz sprayer makes getting into the chamber and covering the bolt carrier easier.  I have friends that actually just dunk the whole bolt carrier in a bucket and they’re done.

Top
Page 1 of 1