All posts tagged quick detach mounts

A discussion about ACOGSs and long range shooting

Sometimes people really get carried away with scope magnification and think that it will increase your accuracy.  Well try taking a 5.5-20×50 scope to the range on a 90F day and tell me if you can even see X on a paper target at 300yds.   Anyone with experience will know that a mirage will void you scope magnificatioin and actually make it very difficult to make pin point accuracy.   A mirage is a constant wave of distorted light due to heat rising and you might be better off with lower magnification or Zero magnification.  Most Trijicon ACOGS are really meant for medium range engagements.

Recently I got to the range and tried out some of the newer green reticle ACOGS and the first one I tried out on my Bushmaster XM15E2 was the Trijicon TA11H-G.    This optic is actually a long range optic and might be best suited for a machine  gun,  The Trijicon TA11H-G ACOG has a green horseshoe reticle which for some reason seems to be very popular.  This particular ACOG has a longer tube than something like the TA31F-G

Top

Should you skip steps when teaching people about defensive shooting ?

Ok, yeah, from a scenario stand point there are always variables which can change things, but there are some steps that you should put all of your efforts into transmitting to a new student before  you can take a step back and have confidence they can stand on their own.   First, safe gun handling skills are important, but there are some things that should be taught immediately after that.   I have in several situations had people call me up and ask me where to get a firearm because they were under serious security risks and they had almost zero firearm handing experience.

There is always a balance that needs to be met with each new shooter.  Some people progress faster than others but you really have to watch you don’t skip steps.  Mounting high optics like the Trijicon rifle scopes, namely the ACOGS on a gun may make a novice shooter more proficient but what about close up engagements? Do they know that those crosshairs are going to be several inches above the point of impact if someone was 10ft in front of them?  What would the ramifications of missing by 2 inches ? I can think of scenarios where they could end badly.

Top

Mounting optics on a battle rifle.

I remember hearing the phrase “don’t put glass on a battle rifle” because it was pretty common in the 1990’s to not have 308 optics that held up to what the FAL and G3 rifles were doing to them.   Many of the battle rifles that were designed in the 1950s and later did not have optics meant for them.  Optics never caught up to combat durability until probable the ACOG  came out.    Even after that the ability to properly mount something like that on an FAL or a G3 style rifle was very difficult.

DSArms still makes the best FAL in my opinion and I own several of them but I have had some issues with the mounts they sell.  After about 3000rds i had a mount come loose and it’s caused me to second guess the design.  The one thing I really like about Trijicon Rifle Scopes especially the Trijicon ACOG is that they can be much easier to mount.   The Trijicon ACOG has a mount that can be screwed on and there is no worry about the reticle turning on you.  Everything will be level right from the get go.  Loctite still has to go on everything that screwd in, but it’s nice to not have to worry about that one thing.

Top
Page 1 of 1