All posts tagged rifle cleaning

Cleaning and fixing guns at the same time

I’ve had a few mistakes in firearm ownership that have nothing to do with gun safety or hunting, it actually had to do with gun maintenance.   There were a few times that I took guns on a hunting trip, didn’t fire them, brought them home and put them in a safe, only to find out a few days later that they were all covered in rust.   Even the morning dew can rust and possible ruin a firearm if you don’t pay attention to what your guns are made out of and how to care for them.   Another time was carrying a Taurus T-85 handgun in a leather holster and not cleaning it once a week, the holster held body sweat and the salts from the sweat pitted the barrel of the handgun.   It wasn’t worth the time and trouble to remove the pits without risking more damage to the firearm.

Along with taking care of your guns and preventing rust from building up, sometimes dents and dings can occur.   It always bothered me that some guys spend thousands on combat firearms and are afraid to shoot them in the rain or snow and then get upset if they get dirt on them.   The reason  most firearms are coated in what they are is for combat or adverse weather conditions.  Next time you are looking for gun cleaning supplies, you should look into picking up a gun blue touch up pen for fixing minor scratches and dings on your firearms.   There are gun blue kits you can buy to re-blue a firearm, but the touch up pen is good for the majority of the minor tweaks and only takes a few seconds.

Top

Revolver cleaning and tools

I finally got around to hitting my Dillon 550B and loaded up a ton of my favorite 38 Special hand loads.   I’m amazed at how well I shoot with some of these bullets because I’m usually doing most of my training with semi-auto guns and the ammo is rarely very accurate.   Hits are usually what I am looking for in defensive shooting, but when I am shooting a Smith & Wesson Model 19, I can actually go for a bulls eye.  A few months ago I dug up a bunch of SWC lead bullets and used  up a  full pound of Unique gun powder.

The one bad thing about getting in a good range day was that I had to clean all of gun gun out of my gun  before I put it away.   I don’t mind shooting lead in revolvers, but I won’t do it in semi-autos anymore.   I used my Otis gun cleaning kit because not only did it have the brushes to get the job done, it had a nice scraper to get in to the areas that needed to be cleaned.   When I used a 1911 and shot lead bullets, I found compacted lead in so many areas that I didn’t think the gun would be reliable if I didn’t get it all out.  The extractor areas can be a tipping point if  you gunk them up.

Top

Some guns were not designed to be cleaned very well

My first semi-auto was a Russian SKS which was when they were going for under $100.   The Russian SKS is a very well thought out semi-auto because in my opinion, I like the operation and disassemble more than the M1 Garand.   I think the Garand is  a fine rifle and far more accurate than an SKS, but the stripper clips and lighter ammuntion is better suited for WWII combat although it was not introduced that early.   The AK ended the short adventure of the SKS much in the same way the M16 shortened the life of the M14.   They were all very well designed and reliable firearms, but they were not modern enough for combat.   One gun I have found that I still enjoy shooting and operating with is the FAL.   The triggers on these guns are a little hard to drop in weight, and the mounts on them really need to be locked in place with something other than just a screwdriver.   The .308 caliber will do a number on scope mounts especially exposing any operator failures to properly “lock it down”.

One thing that made me a fan of the DSA FAL I own is that it was designed to be easy to operate and maintain.   I’ve heard many firearm instructors that I respect say that the M16 does not need to be cleaned as much as people think and lubrication is more important than scrubbing every spec of carbon off the firearm.  I still enjoy cleaning some of my firearms just because I like inspecting the geniousness of the designs.   I literally can clean and FAL with gun cleaning supplies like the Hoppes bores snakes.  The Otis gun cleaning kits aren’t necessary on one of these guns and more appropriate for more complicated designs.  The FAL is hands down the simplest battle rifle to clean.

Top

.308 rifle cleaning on the move

The tactical world is loaded with tons of doodads and accessories that are very well thought out, but sometimes it takes as much time to learn how to use them as it probable took to create the device.    Experience is what we learn from and we get it an many ways.   If you have ever had to pack a backpack and go on a week or longer hike, you’ll know the importance of packing “only what you need to survive” which is a line I stole from Spaceballs the movie.   It’s funny that I have actually seen people go on camping trips with things that plug in and need electricity, and those are the people you’ll probable never see on a camping trip again.   My Boy Scout Troop usually had 2 or 3 campers a year, the new guys, do something like that and the City slicker attitudes usually mean a short stint in the Boy Scouts of America.

When it comes to carrying a firearm like a DMR or Sniper rifle, adding weight to something that is already heavy is not something you are going to want to do.   If you could remove 1 or 2 lbs of weight from a rifle, you can add on the weight of the ammo that replaces it.  I don’t know a single shooter that wouldn’t rather carry more ammo than carry more gun.  There are cleaning systems like boresnakes that are fast and easy, but for serious cleaning, you are going to like the Otis gun cleaning kits for the sniper or DMR.  This gun cleaning kit is meant for a .308 rifle, bolt action or semi-auto, it doesn’t matter.    I’m sure there are people that think they need a cleaning rod for bolt guns, maybe some guns need it, but how the heck do you carry a cleaning rod into the field?

Top

Boresnake life span, are they worth it?

Are they worth it?  Do they hold up to heavy use?   I have the same 22 caliber bore snake and it has been used in 22LR rifles, AR15 rifles, M4 Carbines, AK74 and Mini 14s.   The same bore snake is approximately 6yrs old and probable gets used about  50 times a year.   I usually run the snake through the gun about 2 times.   I may only need to do it once, but i’m use to using cleaning rods and just get in the habit.   I almost only use Break Free CLP on my firearms, and the occasional grease application, and gun cleaning is now simple.

Cleaning revolvers is probable easier than some semi-autos because there is nothing you really need to disassemble.   I have been using the Hoppes boresnakes for rifle the majority of the time because handguns just don’t seem to be that much of a hassle and I’m really not that worried about how clean the barrels are for any particular accuracy reason.    When it comes to cleaning out a bolt action rifle like a Winchester M70,  It sure does make a difference in cleaning time when you do a one, two, and then just wipe the gun down and put it away.   If you clean the guns often, from my experience there is very little worry about hard to clean areas.

Top

If there is a faster way to clean a revolover…

Please show me how I can clean a revolver faster than if I were using a boresnake?   I’ve got several boresnakes that are showing a good bit of wear, but they are still getting the job done on cleaning my rifles and I don’t even think they have gotten to their half life yet.   Just wash them in the wash machine if they start to show signs they are getting too slimy.   The only difference between the pistol and rifle bore snakes is the length and although you can still use a rifle boresnake but it may flop around a little too much.

I have always liked Hoppes boresnakes, but I recently dug out a Ruger GP100 that was a rack queen and took it to the range for a day.   I didn’t put that many rounds through it, but after spending years of range time with Glocks, XD’s and Sigs, it was fun to break out a .357 magnum and do a range  report.  The Hoppes Boresnakes that I have for my handguns have not been used that much, and when it came time to clean the gun, i popped open the cylinder, rang the bore snake through each hole, then the barrel and was trying to figure out what else I needed to do.   That was it!

Top

Keeping it simple, but still wash your hands

I’ve often found it difficult to clean my firearms while wearing gloves, this gets right back to the problem that I have often come across when handing the AR15 rifle with them on.  There are smaller parts to take apart on the M4 Carbine and even though I have to get my hands dirty, I can’t get to all of the parts with gloves on.   There have been times I only fired less than 20rds through a rifle and I wasn’t in the mood for a full firearm disassemble.   If I have a firearm that has gone on a camping trip like my Marlin 336 lever action or a Winchester Model 70 bolt action, I still clean them after every trip even if they have not been fired.   Moisture can get to these types of firearms and I have had many wars with rust in the past.

There are traditional cleaning kits that may work for you, but since I have bent rods cleaning firearms, I strongly recommend against anything but a once piece rifle cleaning rod to prevent damage or issues.   Boresnakes will speed up the process of cleaning your bore and avoid the problems of putting cleaning patches, but you still need to use lube and wash them on occasion.   Otis gun cleaning kits can fit in a rifle stock, your pistol grip or your butt stock depending on how many tools you think you want to store there.

Top

Keeping your guns clean and preventing rust

There has  been much improvement in synthetic lubrication in recent years and I’m hoping that the older toxic gun cleaning materials that I have in my home will eventually get used up and cleaned out.  I’m not going to push Green Energy or some environmental issues on  you, but I have often wondered if I should have been more cautious in the way I cleaned some of my guns and my exposure to some of it.   I’m aware that good ventilation is important, but there are many times when I have attempted to use gloves while cleaning, but it’s very hard to get some parts back into place when you are  using them.

There was a time when I had large containers of Hoppes gun cleaning liquids and those were some of the harshest.  I’ve moved towards using Break Free CLP for most of my gun cleaning, but in recent years I have been using Mobil One synthetic oil for most of my lubrication.  Gun cleaning supplies are becoming easier to use and the old cleaning rods of the past can become your newest rack queen.   I use pistol cleaning rods fairly often, but I rarely use my one piece cleaning rod and mostly use Otis gun cleaning kits or boresnakes for my semi-auto rifles.   The less you have to touch your firearms or the dirty gun patches or cleaning brushes the better you’ll be.   Long exposures to toxic materials does catch up to you.

Top

Extensive gun cleaning and gun supplies

I recently did a walk through at a Dick’s Sporting goods store and I was recently at a Cabela’s here in Pennsylvania.   The gun cleaning kits that I had when I first got my own rifle are still being made, but I just don’t have the urge to give something like that as a Holiday present to family members.  I’m not sure exactly what is going on, but I have so many family members getting their first firearms and it’s been a lot of fun getting them setup with targets, joining gun clubs and helping them take apart and clean the guns.  It’s also been a learning experience because I  didn’t know how to do everything until I did a little research.

I still highly recommend that people have atleast one strong one piece cleaning rod for a rifle or handgun around, but that is only for clearing any bore obstructions.  Boresnakes are the easiest thing for a new shooter to use because not everyone has young eyesight and can see clearly inside the gun to know that everything has been cleaned.  For anyone getting an AR15 or knowing someone getting an AR, the Otis gun cleaning kits are probable the best gift you can give them.    Make sure you get the M16 kit because it has special brushes and tools to get into areas that a cleaning rod just won’t touch.

Top

Advanced gun cleaning for the obvious idiots

I don’t read gun boards very much anymore.  I have had good experiences with some of them and I know some people just like to bash the BS that they see, but not talk about the good.   I have met many people from the forums  in the Northeastern United States and found the vast majority to be above average in intelligence and responsibility.   I say this because I just read some of the dumbest stuff about gun cleaning and think that it may be time for some of these people to turn in their firearms due to showing since of being on the lower level of human evolution.

When you are choosing the cleaning tools for your rifle, make sure you match the cleaning brushes and cleaning patches to the caliber you are using.  If you are using a 22 caliber firearm like an AR15, do yourself a favor and use 22 caliber bore snakes.   I know that may not be common knowledge, but there are idiots out there that  may try and jam or pull a 30 caliber bore snake through the barrel, and guess what, it won’t fit.   You can mess a barrel by doing something as stupid like this, but it happens.  I’ve had pistol cleaning patches get stuck, but I was smart enough to dump a bunch of CLP into the barrel to loosen it up and then back it out, there’s your advanced gun cleaning tip of the day.

Top
1 2 3 Page 2 of 3