All posts tagged Ruger Magazines

Is a 6.8 SPC worth getting?

That is a question we get quite often around here and we always throw a question back to a customer.   People call or show up wanting us to give them advice but there are a lot of liabilities in telling people what to get or do.   So much of gun accessories and firearms has to do with the job at hand and a persons gun skills.   I’ve heard people claim that you can’t shoot long range with a 5.56 gun but I see it done all the time at local gun clubs.   Sure there are instances of high wind where a 5.56 bullet isn’t going to do very well, but sometimes only a 50 bmg is going to get the job done.

Even the trusty and reliable Mini 14 is an often over looked hunting Carbine, but I’ve seen white tails taken up in Vermont with 75gr expanding rounds.   The 6.8SPC would be a more powerful round than what the military is using today but it’s not really going to solve all of your problems.  Most of my friends that own them are using them for hunting rounds and not even for Carbine training ect.  The only problem you may run into when changing uppers in with the gun magazines.  The 5.56 round is better than any handgun round if you use the right kind of ammunition and the AR15 platform gives you lots of caliber options that are really best for upgrading your gun for better hunting.

Top

10rd magazines for 1911s?

This is something I’ve only delved into once and it wasn’t a great experience.   Back in the early 1990’s we had all of that assault weapons ban BS and and aftermarket gun magazines were everywhere.   Some of us that owned certain firearms ended up with unreliable firearms that should have been durable.   $90 Glock magazines were not uncommon and $14.99 for a jamming Mini 14 30rd magazine from USA magazines, which I believe is been long out of existence.   Many people fell back on revolvers and there was a big upsurge back into the 1911 because it was one of those guns that was originally designed for fewer than 10rds which was what the Assault Weapons Ban limited you to.

So some of us messed around with aftermarket 10rd magazines and all of the ones I tried failed pretty quick.   We tried to make the 1911 into it’s highest capacity that we legally could, but the balance pretty much got messed up.   Gun magazines, even a few rounds bigger than standard capacity can make the gun imbalanced or make it harder holster.   There are a lot of reasons to use 10rd magazines like Wilson Combat magazines or Chip McCormick which have a good reputation in competition shooting, but they will protrude considerable.   This may cause snagging on shirts ect if you are considering using one for CCW.   If you’ve ever practiced with you’re gun, which you should have, firing 8rds and reloading is probable a better CCW than thinking a 10rd magazine is going to give you more protection.

Top

Philadelphia Mob’s it’s only a matter of time

Today I was listening to a local talk radio host who had a local reporter on and they were talking about the Flash Mob stuff that was going on there.   In some people’s minds these incidences are not racial, but that is absolutely absurd.   We’ve had at least 3 mob incidences against young white males or old white men and it’s always black on white.   In some camps of our society, racism only applies to things that a white man can do and not the other way around.  Racism exists in all societies and cultures but only those living in the world that Political correctness has created think it only exists when a victim is black.

One of the callers challenged the local news writer about what the news article would be if a gun owner shot one or more of these individuals when they were committing the crime.   The news reporter basically said it at this point it would say something about a “gun owner defends against a mob” I’m paraphrasing, but I thing it was bullshit.  We know that if a gun owner shot one of these individuals and reloaded with using spare gun magazines that it would be excessive or bull  shit that someone that trained to shoot shot 5 or 6 of the criminals and it was unfair that someone would do that against un armed youth.   Considering the ages groups of some of these Flash mobs it would probable not sound justified if a 65yr old man shot 11yr-19yr olders, but the reality is it may well be if things keep up like this.

Top

Magazines that aren’t flush fitting

I have never really liked the feel of having a pistol magazine protrude out of the bottom of the gun unless it is because the gun grip is too small for me.  I’ve seen a few of my friends do this on their Glocks, namely the Glock 26 because it is such a small gun.   I did put an extension on a Sig 239 which is the  only gun I currently own that has this.   The first gun that I owned was a Colt 1991A1 and it only came with one pistol magazine.   It was a Colt magazine which i thought would be the best gun magazine to have, but that turned out to not be true.   After having a few problems with the slide stop not catching, I found out the magazine tab was bending and causing the issue.

I believe it was at a gun show that I picked up 2 Wilson Combat magazines and my Colt 1991A1 ran flawlessly with ball ammo.  The gun magazines really ran well with hollow point ammunition but I found the gun to be too picky with hollow point ammo that I pretty much gave up on worrying about it.   If you look at the velocity that a 45acp is flying at, I don’t think you’ll have massive over penetration issues compared to 9mm ball.   Wilson combat magazines have varying base pads and from my experience this is mostly a concern for competition shooters.   If the magazine drops free I don’t need to worry about gripping it and pulling it out for a fast reload.

Top

Keeping a good marking pen handy

I was recently watching the Make Ready with Paul Howe DVD about Tac Rifle Operator, and it’s a good one.  I definitely put this one up with the must get collection with Magpuls Art of the tactical carbine.   I won’t get too into the DVD because I’d rather you buy them, but one point that came up is something I kind of slack off on.   The topic about marking or putting a strike on a gun magazine when it fails was something that should be monitored.   Most people know to rotate gun magazines, but when do you give up on it and toss it?

I was one of those that had a hard time tossing magazines and usually spent the money to replace followers and magazine springs, but some magazines really aren’t worth keeping around.  When the mag wells get bent or they are absurdly worn, don’t get too caught up in keeping it with your primaries.   When gun magazines even something as tough as Magpul pmags are used, they are a step closer to wearing out or breaking, sometimes they don’t completely crap out on you, they just start to have intermittent malfunctions.   One of those that can occur is a worn magazine follower.   Three strikes and your out is a good philosophy, and keeping a good marking pen around to document this is a very good idea.

Top

.380 guns be realistic about what you are carrying

I think this past year may have been the year of the .380 pistol.   I don’t know exactly why everyone went with the .380 this year, but it was popular and considering the run on the ammunition and it’s lack of availability,  I think I should have purchased some stock in .380 and not just gold.   I recently attended a Taurus firearm event where the TCP .380 was being shown.   When I think of .380 guns I believe that up until this year, I could only think of the Sig Sauer 230 and the Sig 232 and the Walther PPK.  I have enough friends that like the look of the PPK but were not a fan of the gun due to the hammer bite.   If you have big hands that gun is most likely not for you.

The TCP was a little finicky about the ammo it ate, but I have shot several of the Rohrbaugh R9 pistols and they were also very picky about the ammo they ate.   When  you get down to those small semi-auto guns, you better put the range time in to know the limitations of the guns.   You won’t get a pocket pistol that will run for hundreds of rounds without needing to change springs or be lubricated.   Rotating your gun magazines is a must for smaller semi-autos. The .380 is also a very mild round and I witnessed first hand the lack of energy it had when shooting steel plates.  I watched a recent video where I heard 4 shots fired, one miss, 3 hits and the metal plate only fell one time.  Be realistic about the guns you are carrying and and why.

Top

5.11 tactical jeans review pt 1

I finally did my rounds and checked out a few local 5.11 dealers to see what they had in stock.    Something I always find annoying about stopping in these places is how much of a mess the clothing usually is.   I always have to dig around for my sizes and rarely do any of these gun shops or police and security stores keep there crap together.   The other thing that I find annoying is that so many of them clear out certain styles of clothing during the year like there is a non-season for polos and jeans.   Some of these tactical clothing manufacturers are running huge shortages and various products are out of stock for 6-9 months at a time.   I actually noticed many of the gun shops in my neck of the woods stopped selling 5.11 tactical pants because it was too much of a headache for them to deal with.

It was time to restock my tactical pants inventory and I’m not prone to sticking to only one manufacturer.   I have worn 5.11 tactical pants, Eotac, Woolrich Elite and even SigTac.   Each tactical clothing company and tactical gear manufacturer has it’s pros and cons,  but I’d give Eotac and Woolrich Elite the edge on quality control.     I am comparing the Eotac 205 concealed carry jeans to the 5.11 jeans and there is no comparison.   I feel a difference in the movement of each jean, but I really don’t think I feel restricted in any way.   They are both well made, but there are huge differences in the designs.   The Eotac jeans are very similar to the Woolrich Elite Discreet MKII pants, but they are definitely not the same.   The 5.11 jeans are what I’d call more for deep concealment.   There are internal pockets that can hold a j-frame revolver or a small semi-auto and a few spare magazines.   I find the pockets to be a  little too deep and don’t really like the fact the guns are practically inside the pants.   I tried putting a Sig 239 in the pockets with spare magazines and it was extremely uncomfortable when sitting down, so I would have to say you need something smaller than that.

Top

Speed loaders and training courses

I was fortunate to attend a sniper competition a few years ago where I must have learned more about combat than every before.   About 40 students were attending this training competition even and given the rules for attending the match.   Everyone was told to arrive with unloaded firearms, but to keep all of their gear in the cars and attend a safety briefing.    Well, one of the  best events for this competition/training even occurred in the first 30 seconds after the safety briefing.   Everyone was asked if they understood all of the safety rules and when everyone said yes, it began.    The Instructor explained the first stage of the shooting event.   Everyone was told to grab their gear from their car and immediately return to the firing line, unload the gear and engage the targets.   The attendees gave us a big smile while the students/competitors did an “Oh, Shit!”

I sat and watched every student run back to their car which was about 15-30yds behind the firing line, I noticed varying types of rifle cases and rifle bags, some shooters showed up with loaded magazines and others had to manually load the guns, as soon as they were ready to shoot, they engaged the targets.   I believe they had 6 minutes to take down all of the targets from 100-200yds.   The variations in time to engage the enemy targets varied by several minutes.   Anyone that had a M4 Carbine or 30rd magazine that didn’t have loaded gun magazines or didn’t have a speed loader, was the last to engage the targets.   I saw only 2 people out of 40 engage the targets in the first 5 minutes.   Maglula speed loaders are must for anyone serious about using a carbine for self defense, unless  you have the military style loaders.

Top

Rotate your ammo and rotate your mags

There are various stages of CCW experience, those that have made the mistakes, those that have witnessed the mistakes and those that are doomed to see both.  Although a gun owner may be observing all of the firearm safetey rules there are still many things to keep in consideration when CCW a firearm.   Even though a gun hasn’t been fired, if it is being carried it will fill up lint or the gun can become dry.  I have carried guns through out the summer months and found out that I’ve rusted out screws or pitted firearms.  Clean your CCW guns for reliability sake, but also for protection.

It is extremely important for you to rotate your carry ammo.  Many reloaders know the importance of having the proper bullet crimp to prevent bullet setback, but this is something that is inevitable going to occur if you keep closing the slide on the same bullet.  Even if you are not shooting up your ammo, rotate the ammo in your gun magazines to make sure you are not slamming the same first round.  Defensive ammo can be expensive and I realize that you aren’t going to want to shoot it all up after a couple times of cleaning  your ammo.  If you rotate just an 8rd magazine full of defensive ammo, you should be able to dissassemble and clean the gun safetly about 24 times with the same magazine.

Top

Practical and tactical should go hand in hand

Although I am a big fan of battle rifles and prefer to carry a gun bigger than an M4, if I gotta carry ammo on my person and it’s not being carried in the trunk of my car, I’ll gladly take the smaller caliber.    The M1 Garand is a great and powerful weapon, but combat is at a much faster pace and being able to suppress a target with small arms is as important as neutralizing it.  If you are a weekend warrior and are considering taking a Carbine Class, even though your training will take place in the Course, you should do research on gear and accessories before you walk in the door.

 

I always try to sit in on training courses whenever I can although I wish I had the time to actually take more classes.   I’ve written on several occassions that one of my greatest joys of watching classes is watching all of the gear fall off or fail a student and watching their slow evolution of losing gear along the way.   Theirs nothing wrong with being a tactical accessory junky, but if you have to carry an M4 all day like i’ve had to, you’ll quickly learn that lightweight, means a happy person.  There seems to be a big craze getting tactical gear with the quad rails even though most people don’t need them, and then having to go out and get rail covers, when a simple stock would have lightend the gun by a few pounds.

 

Top
1 2 Page 1 of 2