All posts tagged Springfield XD

Pocket guns and laser grips

While I was recently at the NRA Convention in Pittsburgh this month, the biggest buzz was going on over at the Ruger area.   I’m still waiting for more feedback about the Sig 238 and I’ve already learned to not jump on newly produced firearms.   There are always recalls and product alterations in the first few years and sometimes the changes are considerable.   Extractor flaws, slide cracks and sometimes something as simple as a trigger pin or screw can fail on a design.   The Ruger LCP had some issues when it first came out, but considering the number of holster designers that are making holsters for this gun and the recent surge in CCW pocket guns, this is hands down the number one gun.

I think the mentality around this type of CCW gun is that it is the smallest most concealable firearm that looks good and is fun to shoot.   Some pocket pistols are not fun to shoot and are high maintenance. Another thing that helps improve the usefulness of the firearms is the Crimson trace laser grips that attach in a very good way.   I’ve got a few older model crimson trace laser grips and I see that the biggest flaw is that the laser is on the side of the firearm and can get blocked if you do not grip the firearm properly.   The proper place for a laser is as close to the muzzle as possible or at the least right under it.

Top

Summer heat and transitioning from one firearm to another

In this part of  the State we get all 4 seasons and some of the changes in weather can be drastic.  This year I’m transitioning over to polymer guns for summer CCW because I’ve rusted out the grip screws on so many of my Sig and Beretta firearms.   IWB is a must in the summer for my semi-autos but I have been using a Ruger LCR for pocket carry in environments were ultra concealment is called for.  I always like the looks of leather,  but now I am locked in with  using Kydex holsters for the same reasons I’m switching firearm, no rust as far as I’ve seen.

I’m still too skinny to carry with a paddle holster and I’ve had to retire all of my Blackhawk holsters because they still print if I wear a t-shirt.   Vests are too obvious in summer weather, but you can get away with it in the Spring.   I really miss carrying my Sig 226, but it’s time to play with my Glock 19, retired the Blackhawk holsters and go with an Uncle Mike’s kydex holster.   I’ll see  how well these holsters hold up because the belt clips I’ve had on previous holsters didn’t hold up very well and there were times I’ve stood up at work and was holding my gun in a holster because it just lifted right off my belt.

Top

Magazine pouches, fobus vs Blackhawk

I have had a lot of experience using nylon gun holsters and I really can’t say anything bad about them except for the thumb break stile holsters.   I’m not a big fan of holsters with straps on them and I presently only prefer the Blackhawk Serpa holsters for locking and firearm retention.   My Fobus holsters have always served me well and I believe I may own one holster for every medium and large frame auto in my collection.  Fobus makes a nice paddle holster, but I have had experience with the magazine holders and I am not a big fan.

I have quite a few nylon magazine holders and they are very good and keep the magazines where I want them, I do not like to use the nylon magazine holders for CCW and after a short stint at using the Fobus holsters magazine holders, I found out that there is a limit to how many paddle style holsters I can wear comfortable.   I do not recommend the fobus paddle magazine holders because you will feel it dig into you if you have to roll around.  The Blackhawk single and double stack magazines are the best because they actually have tension and mags won’t fly out easy and they aren’t covered like a nylon magazine holder is.

Top

Paddle holsters and CCW

This is an area that can cause much debate in the CCW world because if you are concealing a firearm in a paddle holster you are almost always going to have to wear a vest or a long coat, not all environments can tolerate a jacket, and most jackets are either not going to be long enough or they will make you sweat, just in for concealing a firearm in this manor.  I really like the Blackhawk Serpa holsters, but they do extend a little further out on the body that something like a Don Hume Jit holster which is flat up against a belt.

Firearm retention in a holster is important for LEO and people carrying open carry, but not so much for CCW.  Yes you may get in a scuffle and have a firearm fly out of a  holster, but the Blackhawk holsters make get a little difficult to release if you are not in a good position, there are always methods and tactics that people should train with and trying a  holster out in an adverse position is something  you should try doing.  Try pulling the firearm laying on  your side, or in the seated position and you’ll know what I mean.   If you are sitting down, you’ll realize how odd it will feel and how high you’ll have to left your shoulder to clear it.

Top

Galco holsters, I thought I had the wrong holster

I’ve been on a holster binge lately and I’ve been  picking up whatever I can for the revolving CCW guns that I carry.   I have been trying to modernize my rotation with a few Springfield XD variants an a Glock 19 and a Glock 26.   I went back to leather holsters after shying away from them for a few years.  I had a bad experience with an Alessi Talon holster that was holding so much sweat that it ruined a Tauras T-85 38 special.   I skipped a monthly cleaning and found out the holster actually had a gew in it and the barrel was pitted.

I think the best CCW is really the IWB but I know not all body types handle it very well, last night I got an order in the mail and decided to try out the Galco holsters that were IWB.    The Galco Tuck-N-Go holster looked like a good thing for me to test out, but I actually thought I had the wrong holster after having so much trouble getting the gun into it.   The slide was actually racking when I put the holster in so I had to stop, after doing some research online, I’m over reacting a little bit and going to see if I can break it in a little more.  I’m not too happy with the fact I can’t really re holster the gun properly because it seems to cave in on itself.   I’ll give it test in a few days.

Top

Uploading magazines, single stack and double stack

I use to upload all of my guns until a bad experience occurred to me with several of my gun safe firearms.   I mostly buy used firearms and my Sig 229 in .357 sat in a gun safe loaded with 12+1.   I bought the gun  used and replaced all of the magazine springs with Wolff gun springs, did a range test, and then when the gun passed the range report, I loaded it up and put it away in the safe for 9 months.  Thinking that taking this gun to an IDPA match would be a good way of testing it out and making sure it was reliable, I just took it with me and give it a run.

I had another Sig 229 with me, but this was in 40 S&W and it was also loaded to capacity.   Needless to say, both guns failed on me.   I  have a Colt 1911 with 8+1 rounds of 45acp in a Wilson Combat magazine and it has never failed me.   The only problem I have with it is that I need to really make sure the magazine is seat properly because it barely clicks in.   All magazines have been downloaded by at least 1 rd and since then, all of the guns have passed range tests even after long term storage.  Be careful about what you read on the internet, uploading many guns for long periods of time will decrease reliability.

Top

Sig 220 vs the 1911

I think there is just something about a 45acp that really makes firearms manufacturers do it right.  There is always preference when it comes to which firearm you want, and due to modern technology, many firearms are very reliable under almost all conditions.   The arguments about which caliber handgun has more stopping power will probable be a non-issue in coming years due to less lethal weapons like tasers ect.

I can’t think of any 45acp gun that is a full size semi-auto that I don’t like like.   The Springfield XD seems to be the most popular 45acp amongst 45acp enthusiasts.  Mostly because it feels closer to a 1911 and it is very well balanced.  Wilson Combat Magazines give the 1911 more reliability, but unless you do some alterations to the throat of the barrel, it won’t tolerate as much ammunition as the Sig 220 or the Springfield XD.

 

Top

Military handguns and gun grips

I know several first hand bitchin and moaning concerning both the 1911 and Beretta 92FS or both.   I rarely engage in these arguments because I am experienced enough to know that people have preferences and forcing someone to carry a firearm that does not fit them very well is not wise.   I expect that the military will eventually move towards an handgun that is more versatile as far as adjusting to varying hand sizes much in the way that the M4 Carbine is adjustable for various operators.

The guns that seem to have improved operator control with gun grip changes were the Sig family of firearms.   There is something serious lacking in the factory grips because in my humble opinion they feel too slippery and that is not something I think is good.   Every Sig that I have seen in a Defensive Training course had altered gun grip and everyone was using the Hogue pistol grips, wrap around, finger grooves or standard ones.   My Beretta 92FS felt smaller by putting finger groove grips on it and the Sig 239 I own feels like it’s suppose to, an extension of my hand.

 

Top

Beretta 92FS open carry and non-CCW environments

I do a lot of security evaluations on commercial and private properties.   Much of what I find is obvious to those with street smarts, but not every has those.  Unfortunately some of the best prepared gun owners I know are the ones that had crimes committed against them and they had to learn the hard way.   I’m  not any different in those regards, but there are plenty of crimes I have studied just by watching the news and reading the local newspapers.  I actually  highly recommend that anyone that is considering take the big leap and taking defensive firearms courses to spend one month of reading weekly newspapers about the crimes that are committed in their home towns.

Just tonight I saw a story about a completely innocent guy who walked out of a Target shopping store and was in the wrong place at the wrong time, a drug addict in a bad move just started stabbing him.   What would you have done?   I have been carrying a Beretta 92FS in a Fobus holster for several years now, which is one of my primary CCW in the winter, and the reason I am carrying this holster is that it paddle holsters are easy to take off and put on and getting into and out of a bank with high security like metal detectors, means the guns have to come off.

Top

Spring and Summer holster options

With the advent of the Glock pistol, I have thought that it was smart to consider getting gun manufacturers to move in that direct, and I think just about everyone is on the bandwagon now.   I think firearms are like Golf Clubs and baseball bats, and everyone is going to have to find one that works for them and not expect every person to be using the same one.   There is a difference between someone that does investigation in a PD and someone that is showing up on the scene of a crime and rifles and handguns are should be chosen in the appropriate environments.

I have ruined a few firearms whether it was pitted or rusted out screws, and pretty much removed leather holsters from my non-Winter carry options.   My paddle holsters are all Fobus and Blackhawk holsters and I have no real concerns about using them, but I am still finding rust on some of my pistols.   I have taken the plunge into carrying Glocks for a few months just to see if I can adjust to the feel.   I’m still not very comfortable, but I will give it a few more months and possible look into getting a Springfield XD or a Smith & Wesson M&P pistol.

Top
1 2 3 4 Page 2 of 4