All posts in AR15 Uppers

Having fun but having the right stuff

I would have to say that the vast majority of those that have anything more than a flashlight and optic on the M4 are probable putting something on our guns that we really don’t need, but just enjoy having on.   There’s nothing wrong with having an LWRCI upper with a quad rail or a MidWest quad rail if you think you can put it to use, but when we actually have to carry the Carbine for any real length of time, we’ll wish we could strip a few extra pounds of weight off the gun.  Many of our Staff have been attending competition shoots lately that have been really well run.   These events are everything from battle scenarios or even Zombie shoots.

Last  year in Pennsylvania we attended a Carbine shoot where the the attendees has to sign in at 8am and once they left the club house, they couldn’t drop off any gear and had to lug it all with them for the day.   All of the competitors were carrying M4 or AR15 variants and a few had AK rifles.    Ammunition loads were approximately 400rds of rifle and 100rds of handgun ammo.    I enjoy these events because we get too see some real hard use of tactical gear and tactical accessories.   We tend to not see things fail at these shoots because the competitors are in the higher class as far as skill and the types of firearms they use.   If you ever want to see what kind of optics work and which firearms and when things jam, go to a competition shoot at your gun club and sit back and watch.

Top

Ruger 10/22 range day and scope options

I’m brainstorming with this blog post so give me some of your advice if you have any on what to put on my Ruger 10/22 rifle.   This is a standard 10/22 and not a tricked out barrel or trigger.   I purchased all of my 22lr for new shooters to learn on and didn’t want to get too fancy with optics in the beginning.   After picking up a Marlin Model 980 bolt action and having the rear sight replaced with an adjustable elevation like the standard 10/22,  I haven’t had the urge to buy another optic for this gun.   Many bolt actions are capable of shooting quarter size groups at 100yds with the right kind of ammo, but even though my bolt action has that capability, I still wanted it for novice introduction to firearms.

My ruger 10/22 was a training gun, but after recently doing some aggressive testing between the two, there was no comparison in accuracy.   The bolt action was shooting dime size groups at 50ft and the Ruger was shooting 2 inch groups with the same ammo.   I’m thinking about picking up a rifle scope for this gun that is either a fixed power or a red dot.   I have a Butler Creek 25 round magazine that I have yet to test out, but it could be a good close quarters combat training tool for wiping out soda cans and other carbonated reactive targets.   I had an Eotech 552 on a Ruger Mini 14 and had fun with it, but went back to a 3-9x40mm scope because it just seemed more practical.

Top

Magpul DVD review

I am almost all the way through the entire Magpul DVD collection.    After several years of being on the firing range as a student and an instructor, I have often been asked if I know about any good DVDs for training.   I started out watching The Art of the tactical Carbine Volume I over a year ago and finished off Volume II about 6 months ago.   I thought the volume of info and the length of the DVDs to be very well worth the amount of money I spent, I was really impressed with how much time there was.    I would recommend these DVDs to beginners even though I do not think they are novice level training.  There are some basics in this, but the application of advanced basics is in there.

The Magpul Aerial Platform DVD was in my opinion more for the History Channel than it was for the gun owner, but I would get this one last over the other three Volumes.     The Art of the dynamic handgun is by far the best bang for the buck.   Clint Smith has some very well produced DVDS but they were expensive and I thought they could have been more informative.   I give them to family members that are new to firearms, but the Magpul dvds were in my opinion a step up.   I haven’t been to Thunder Ranch, but I intend to do so some day due to it’s great reputation, but I think The folks at Magpul owe me some more defensive training DVDs.

Top

5.11 tactical jeans review pt 1

I finally did my rounds and checked out a few local 5.11 dealers to see what they had in stock.    Something I always find annoying about stopping in these places is how much of a mess the clothing usually is.   I always have to dig around for my sizes and rarely do any of these gun shops or police and security stores keep there crap together.   The other thing that I find annoying is that so many of them clear out certain styles of clothing during the year like there is a non-season for polos and jeans.   Some of these tactical clothing manufacturers are running huge shortages and various products are out of stock for 6-9 months at a time.   I actually noticed many of the gun shops in my neck of the woods stopped selling 5.11 tactical pants because it was too much of a headache for them to deal with.

It was time to restock my tactical pants inventory and I’m not prone to sticking to only one manufacturer.   I have worn 5.11 tactical pants, Eotac, Woolrich Elite and even SigTac.   Each tactical clothing company and tactical gear manufacturer has it’s pros and cons,  but I’d give Eotac and Woolrich Elite the edge on quality control.     I am comparing the Eotac 205 concealed carry jeans to the 5.11 jeans and there is no comparison.   I feel a difference in the movement of each jean, but I really don’t think I feel restricted in any way.   They are both well made, but there are huge differences in the designs.   The Eotac jeans are very similar to the Woolrich Elite Discreet MKII pants, but they are definitely not the same.   The 5.11 jeans are what I’d call more for deep concealment.   There are internal pockets that can hold a j-frame revolver or a small semi-auto and a few spare magazines.   I find the pockets to be a  little too deep and don’t really like the fact the guns are practically inside the pants.   I tried putting a Sig 239 in the pockets with spare magazines and it was extremely uncomfortable when sitting down, so I would have to say you need something smaller than that.

Top

Bans on gun stocks and accessories

I feel sorry for some of the people that are gun owners and are presently stepping into the word of AR15, AK or Mini 14 ownership for the first time and live in anti-gun States.  I have had some really bizarre conversations with friends in California and New Jersey that had to take AR15 or FAL gun magazines and have blocks welded into them so they couldn’t take more than 10rds.  To some people these sounds like a good thing, but the real problem is  you are taking something that is functional at a certain operating system and potentially messing the whole thing up.  Magazine capacity restrictions are like putting smaller gas tanks on cars to keep people from speeding.   The other problems that many in New Jersey or California and other States run into are gun accessories like flash hiders or folding stocks, these are all usually banned.

I find the whole issue about bans on gun accessories like bayonets and folding stocks to basically be about people trying to put band aids on your kids body parts where there is no bleeding expecting to stop another person from beating him or her up.    Nobody wants to talk about how most gun crime is from the drug trade which basically is a self inflicted problem due to our Federal Government getting involved.    Gun accessories like, bayonets, flash hiders, folding stocks,  collapsing rifle stocks have no bearing on reducing crime and putting people who are a threat to society in jail for long periods of time would have more impact on reducing crime than making law abiding citizens block 20rd magazines so they can only hold 10.

Top

Road trips and cleaning firearms

I was never one to jump on the bandwagon that it should  be necessary for someone in the military to break their M16 down every day and clean it.   I always thought that if the gun needed that much attention, they really should think about a new design.   The real reason the military does this for many soldiers is basically to keep everyone occupied and give them something to do.   I don’t think even an M16 needs to be cleaned more than 2 or 3 times a week, even in dirty conditions.   I’m sure that it some situations you are better off keeping  your chamber hatch closed and not opening to clean it when the air is full of sand and will just attach itself to the gun lube on your  bolt.   We sell a lot of Otis gun cleaning kits to the military for a reason though.   Everything you could want to clean a pistol or rifle is in a small compact case.

I personally find using rifle cleaning rods to be easier and for some reason I feel like I am getting a thorough cleaning.   Bore snakes work very well, but I have found them to become real messy to use if they are being used often.   You have to put them back in the clear case they came with and sometimes I feel it’s easier and cleaner to toss out dirty cleaning patches instead of putting the filthy boresnake back in it’s patch.   Bore snakes are easy to clean if you want to toss them in a wash machine, but this isn’t practical if you are on a road trip.   Otis gun cleaning kits, depending on which you purchase, should have just about every tool and brush you need to clean your firearm.   I did jam a patch in a rifle once and i did have to resort to using a cleaning rod to unjam it, but after I got the right method for “taking a pinch on the patch” and not using too much of it for a smaller caliber, I got the job done.   Otis has plenty of videos you can watch before you buy a cleaning kit if you think the kits are a little overwhelming.

Top

5.45×39 upper receiver options

I recently got to witness the Smith & Wesson 5.45×39 in action a zombie shoot competition.   This upper has been on the market for a few years, but in all honesty I don’t know anyone that has actually put one to hard use.   I always thought that the direct impingement design didn’t lend itself very well to Russian ammo.  Many AR15 jam up and do not work very well with Wolf ammo and from my experience there are more FTF when mixing Russian ammo with American guns.    Not only do many of these guns fail to fire, the ammo is ditier and can cause failures to extract.  Sure you can always get around some of these issues by constantly cleaning,  but I wouldn’t expect my AR15 to be combat reliable with Russian ammo, especially when the round count gets up there.   We’ve sold a great many upper receivers in the 2010 and the Smith & Wesson 5.45×39 is the number one seller.

Smith & Wesson 556 guns were one of the best made guns in 2009 and many of my fellow firearms instructors will testify to this.   Even though there are still some issues with the DI type guns, the guns being made today are superior to the AR15 DI guns from 10yrs ago.   LWRCI has their own short stroke piston upper receivers in 5.45×39 , but from what I have seen in the firearms market, I don’t jump on the bandwagon with new guns until they’ve been out in the field for several years.   I saw changes to firearms from Rugers LCP and LCR  and even the Springfield XD guns were all slightly modified after being out for only a year.   Let the feedback from the end user determine which guns are better unless you want to be the beta tester.

Top

Your AR15 is probable not the AR15 your father had

It’s funny making a statement like that because I still feel like the AR15 is a new gun, but the reality is that it is now something that many of us had in the 1980s and 1990’s and now we have kids that are shooting them.    The AR15 is now probable the most popular firearm being sold in the Country, not only can you use it for close quarters combat and house to house clearing, there are varmint versions that are extremely accurate.   The whole durability and design of the rifle has improved dramitically, even though the M16A2 has been in service for about 25yrs and is a considerable leap in reliability over the A1, other changes have been made.

Chrome barrels use to be the thing that helped keep the direct impingement guns in a better functionality, but gun magazine improvements have reduced the number of malfunctions I see by atleast 95%.   I don’t see the failures to feed or the double feeding that I use to and it’s primarily due to the Magpul P-mags.   These magazines feed better than most and you can drive a car over them and still have them work.  Swapping out the upper receivers on an AR15 involves pushing 2 pins out, and there are many configurations from CMMG, LWRCI, DPMS that will improve the durability over lower grade guns.  If you want a combat reliable AR15, you will probable have to do a few things to an AR15 that costs under $800 to get it up to par, but overall I am very impressed with the improvements I see across the board  in the AR15 community.

Top

Beware of over cleaning

I admit that I have been called a perfectionist.  I have several years experience in working in the music industry and in that line of work, only the best work gets noticed.   When it comes to maintaining a car, you can waste a lot of time working on things that aren’t going to increase your mileage or prevent it from getting hit by another car.   Although many of us like to take our favorite firearms out of the safe from time to time, and wipe them down and look everything over, there can be a point where shoving a cleaning rod down a barrel too often will cause excessive wear and tear.

In a Carbine course, we got a good lecture on some of the BS that people are claiming about the amount of maintenance the AR15 direct impingement guns need.   The reality is that they sure as heck do need to be cleaned more than any other semi-auto military rifle, but not as much as  some people claim.  The reasons the military makes soldiers do this so often is to basically just keep them occupied.   Keeping the gun lubricated and putting a few drops where it’s needed is all we  had to do while running a Carbine course and not a single one of us had an issue.  Be careful about how much you use your gun cleaning supplies on your firearms, but also, make sure you have the right tools for the firearm.   There are some neat cleaning brushes and tools that you can get from Otis gun cleaning kits and they will help you get into the areas that are hard to reach.

Top

gun cleaning on the road

I’m fortunate enough to have the opportunity to travel and witness some hard core firearms training events.   I think it should be part of everyones training to know approximately how long people should go before doing gun maintenance because the reality hits you that you may be wasting your time if you are cleaning it too much.   There are many times when an instructor will just say that it’s time to lubricate your firearm, but not break it down.   I’ve heard from many of my fellow instructors that 80% of gun cleaning is unnecessary.   According to some posts I’ve read, some say that it can actually cause more wear and damge than not cleaning.

If you are shooting a precision rifle, cleaning the barrel is of the utmost importance, but we have to realize that even though our AR15 rifles or handguns may be accurate, if we are taking real defensive or tactical training, we gotta treat them like the combat weapons that they are meant to be.   That way we have a good idea how long they can go so we can gain their trust.  When we are choosing gun cleaning supplies we should also look into the portability of the items we are brining and if we are just risking ruining our range bag because the bottles are not meant to be carried around.   Otis gun cleaning kits are probable your only real option in this category of gun cleaning unless you assemble your own.

Top
1 … 10 11 12 13 14 15 Page 12 of 15