All posts tagged Leupold Optics

Making a rifle into a DMR

The term Designated Marksmen Rifle has been around for a long time, but in the last 8yrs it has really made a comeback.   When the United States invaded Iraq, there was more street fighting and urban engagements that in the first Persian Gulf War.   I remember making some comments to a few friends about what we will see evolved with the military now that we actually have boots on the ground.   We expected to see the M16 replaced by now, but according to many sources, the piston driven versions of the M16 are in service in Special Forces and some branches.  Even rumors that the H&K 416 was used to kill Osama Bin Laden.

You can make any rifle into a Designated Marksmen Rifle.    In my opinion it usually means putting a higher magnification optics like a Trijicon ACOG or  Leupold Rifle Scopes on them.   If you have a good enough operator behind a weapon the standard M16A2 can be a very leathal weapon out to 600yds, especially with the right type of ammo.   There are some really good rounds for longer engagements, but the .308 is probable a better choice.  There are many times where a bad guy sticks his head out and it’s too hard to get them with an M4 Carbine.   The LWRC REPR is probable the nicest .308 gun designed for this role that is actually a few pounds lighter than it’s predecessors.

Top

Ruger 10/22 range day and scope options

I’m brainstorming with this blog post so give me some of your advice if you have any on what to put on my Ruger 10/22 rifle.   This is a standard 10/22 and not a tricked out barrel or trigger.   I purchased all of my 22lr for new shooters to learn on and didn’t want to get too fancy with optics in the beginning.   After picking up a Marlin Model 980 bolt action and having the rear sight replaced with an adjustable elevation like the standard 10/22,  I haven’t had the urge to buy another optic for this gun.   Many bolt actions are capable of shooting quarter size groups at 100yds with the right kind of ammo, but even though my bolt action has that capability, I still wanted it for novice introduction to firearms.

My ruger 10/22 was a training gun, but after recently doing some aggressive testing between the two, there was no comparison in accuracy.   The bolt action was shooting dime size groups at 50ft and the Ruger was shooting 2 inch groups with the same ammo.   I’m thinking about picking up a rifle scope for this gun that is either a fixed power or a red dot.   I have a Butler Creek 25 round magazine that I have yet to test out, but it could be a good close quarters combat training tool for wiping out soda cans and other carbonated reactive targets.   I had an Eotech 552 on a Ruger Mini 14 and had fun with it, but went back to a 3-9x40mm scope because it just seemed more practical.

Top

Excessive magnification, or effective upgrade?

I have a Winchester Model 70 Pre 64 that I got off a family member for hunting when I was 17yrs old.   At the time, the 3-9 Redfield scope was good enough for me to average 2 inch groups at a 100yds.   As I grew older I slowly learned the tricks to cut my groups down and it wasn’t all about trigger control.   Stock work and trigger tuning got this 2 MOA gun to being able to put 9 rounds in a 2 inch circle at 200yds.   My Zeiss 6.5-20×50 gave me an edge for target shooting, but I realize it’s a little much for your average New York State white tails.

 

 

Just like many of the options we have when thinking about selecting a firearm, caliber, holster, sights, rifle scopes, we have to do a little thinking ahead.   We have to realize that there is such a thing as versatility with various rifle scopes , but nobody has a do it all scope yet.   I think there is going to be a day when we have a rifle scope that is zero magnification at one setting and 40x at another setting with bullet calibration and computerization built into the reticle, but right now, that would probable cost too much to field these kinds of rifle scopes to the average citizen.

 

Top

The Beginnings of Leupold & Stevens, Inc.

lp53532-2

In the world of telescopic sights, Leupold is one of the most known and trusted names. Leupold & Stevens, Inc. is also responsible for manufacturing items such as spotting scopes, red dot sights, and binoculars. They are located in Beaverton, Oregon, and they were founded in 1907. In business for an impressive amount of years, the company has always been family owned, and as such, it has been passed on through five generations.

The overarching company was founded by Markus Friedrich Leupold along with Adam Voelpel, his brother-in-law. Their initial focus was survey equipment, but they moved to scopes after Leupold was hunting, and he missed a deer when his scope fogged up. While they remain well known for these scopes, they are also particularly known for their Leupold binoculars. Primarily used for sport hunting, these binoculars are widely considered one of the most reliable.

Top

Leupold Scopes

Leupold ScopesIt’s a decidedly American story: one century ago in 1907, a young German immigrant named Fred Leupold set up a one man shop at 5th and Oak Streets in Portland, Oregon, repairing optics for surveying equipment. Leupold & Stevens is still family owned, though our focus has turned from surveying to helping people all across the globe survey their environments with the innovative, high-performance sports optics and accessories.

A lot happened in between. Fred Leupold was joined by his brother-in-law, Adam Voelpel. Later, an ingenious and prolific inventor and consulting engineer named John Cyprian Stevens became a partner in the business. The small company survived the First World War and the Great Depression. But it was the Second World War that would change the company forever. Working with the U.S. Army on a riflescope and the Navy on Leuopold optics for use aboard ships, the engineers at Leupold learned the secrets of waterproofing and durable construction that would completely change the world of sports optics.

Top
Page 1 of 1